What Have You Done To Your 2nd Gen Tacoma Today?

Yeah...I built the harness that goes from the bussmann relay box into the cab a cpl weeks ago and just had the molex plug hangin out above the console. There are some more pictures of it on my build thread. I bought a used overhead console from a fellow TW member so I could tinker with it without ruining my original. I just need to add the lights and compressor so the switches will not just look purty

Full disclosure...I followed the write up that @tacozord posted

 

managed to adjust the driver side 6112 shock, without a spring compressor. used the jack method and was able to move the c clip up one setting on the drivers side to help correct the tacoma lean.

 

No mods, but I came across this video today for installing LED daytime running lights in a '12 - '15. The video is made by a Toyota certified tech and it's easy enough for the biggest of novices (like myself) to do.

 

New in cab air filter. The old one was just a bit dirty.

 

Plasti-dip chrome bumper and cleared, I'm liking it. Going to need to get a painted bumper now. Sound deadened roof. Did doors about a month ago. Now to do the floor soon.

 

Did it make a good difference for dulling down outside noises? I'm doing my doors for sure in spring and have been contemplating whether or not it's worth taking it further.

 

I can't tell a big difference in road noise on roof. It will hopefully help on this he hollow sound in the rain, the headliner in very thin. Doors helped some, I did them when I did an OEM Audio system install in early November. I've read doing the floor is pretty helpful on noise and I'd think it should help. I just haven't had time to do it yet. It took 40 sq feet to do doors and roof. I still have 40 sq feet left so it's going on the floor. Btw I'll be getting your mirror kit soon I hope, it's on my list.

 

Can you post some construction details on this? Looks incredible!

 

Just installed the devil horns, thanks Andres.

 

I picked up one of the RAAMAudio deadener packs, enough to do the doors at this point. It does look like a time consuming ordeal but the doors is for a speaker upgrade and the rest I'd be willing to do if it makes a big difference in reducing noise.

Sounds good on the kit... I'm sure you'll be glad once you have it installed!

 

Similar here, got her on 9/29/14 and have 35,742 on her now.

 

Installed a DeeZee Bed box. Measures out at 37x22x17. Very pleased with it so far.

 

Santa delivered! ( on Sunday no less!). Wifey grabbed and wrapped before I got to peek, but after a very scientific weight and shake test, I thinks it's recovery gear like straps and shackles and stuff!

 

Always wanted to replace the stock manual shift knob got this one to match my suspension but I had to tap the knob because icon only makes them for auto no big deal just tap it with a 12mm 1.25 tap & done.

 

I love this thread. So many ideas.

 

I need to find a set of these but I dont think my walmart carries these.

 

I finally got fed up with my squeaky leaf springs so I took the tires off and torqued the crap out of the leaf spring bolts. No more squeaks for now... I hope it holds

 

I had the chrome bumper wrapped deep matte black with 1080 3m.

 

Looks awesome! Congrats!!

 

Thanks man...couldn't have done it without you @tacozord