What Have You Done To Your 2nd Gen Tacoma Today?

replace steering rack high pressure line return line outer and inner tie-rods upper control arms to the high camber jba's 8 hours 2 people to do it all now to get an alignment

 

If your sensors are no good, this won't work

 

true

 

I just grounded the blue wire that goes to the module under the radio, it tricks the computer to think all is good, mine is an 06 DCSB Prerunner

 

Thanks. I knew my light was going to be on forever when I sold my tpms a couple months after I bought it

 

So grounding it out will turn the light off? I dont have sensors in my new wheels and my lighs been on lol.

 

It wasn't today, it was last week but....




No, not talking about the bow but it is pretty spiffy too...
Icon remote resi coilover with the 700 lb coil..all the added weight from the bumper, winch and sliders had the truck sagging back down to near stock height. Rides like butter off road with absolutely zero rub and no metal chopping needed. I highly recommend the folks @Wheeler's Off-Road Inc for helping me pick the right parts for my application.

 

Yes, it worked for my 06, not sure about other years

 

Sorry, but for $130 I expect a resistor pack to be included with the lights. Also, they have not published any information regarding testing and performance of this bulb. Anyone can purchase CREE LEDs and put them into an adapter base, so you better justify the high price tag before you get my money.
I'm not saying the bulbs are bad, just that I'd rather see some more info. Meanwhile, I'll stick to the old style cheaper bulbs.

 

nice, ive got one under the awning and its one of my most used lights

 

Ok, Need some help with my 2009 with 77K miles....Detailed my Tacoma this past weekend and took it out for a drive. I had my air selector on defrost and later on went to change it to front vents and it doesn't change. When turned on high you can hear it blowing hard. It seems to still heat and A/C cuts on when selected it just seems the selector knob wont change to any other position. Any ideas or anyone else ever had this issue.
Thanks in advance.

 

Nice Work! Looks really good.

 

Completed my Prerunner -> 4x4 conversion on my 2011 TRD OR yesterday.

Decided to go with the FJ Transfer Case and the FJ Tube Front Diff ADD Actuator Delete, so no electronics involved in the process.
Most parts sourced through Ebay over time, and lots of ideas and learning from previous posts here on TW...
Thank you to everyone who's posted this type of info in the past!

 

Hmmm gunna have to research this and give it a go. Thanks!

 

Check out this thread:
https://www.tacomaworld.com/threads/2012-tpms-light-disabled.284690/

I did it on my 2011 and it worked perfectly.

 

Yes. My blue wire was found on the passenger side tho. I followed a how-to in here somewhere dedicated to turning off the tpms. I have an 06 but it still applies to 07.

 

Did you get a good write up of it?

 

Awesome thanks!

 

Sweet thank you!