Wheel Bearings/Hubs 4x4 & 4x2 PreRunner for sale *complete* save $$ CUSTOM BUILT AVAILABLE

Ah so no coming to sand and fish.....

 

Ok I'll reply to this in a professional manner.

This assembly is not "damaged".

This is a Pre Runner assembly. The Pre Runner has a nut that is torqued onto the hub flange. After the nut is torqued, the lip on the nut is staked down into the groove on the hub flange, as it is in the picture.

There is nothing wrong with this hub.

 

If ANYONE is not happy with their hub assembly and has not installed it, send it back and I'll refund your money.

 

SURE IS A STAKED NUT

I don't build or sell shit, I don't do poor work. I would not ship anything out that I wouldn't put on my personal vehicle.

 

IMO I would say I have to agree with the OP. Yes, it does seem a little extreme compared to something I would put out, BUT these are clearly aftermarket parts (which I don't see a problem with) and they tend to respond differently than a factory part might. When using factory parts, there is a SMALL spot that we dimple in for securing it, but you can tell the hub is definitely different on these than a factory one and to me it looks as though the area to be dimpled is in fact larger than that of a factory one. Again, that's just my .02, but I see no problem with it, visually speaking, I can only judge so much by a picture.

 

I think you owe an apology, as well as the others for spewing nonsense about something you are completely clueless about.

as far as a comment? it's been worked out with the mods.

 

Do want.

 

You were judge, jury & executioner in a matter of 60 minutes and you respond with "fair enough"....?

Read your own sig...
http://www.tacomaworld.com/forum/site-news-announcements/17179-tacomaworld-code-conduct.html


Personal attacks or threats against other members will not be tolerated and generally results in expulsion from the site.

Should you have reason to take issue with a thread or post content, please discuss it with the Site Administrator or Moderators. Do not feel obligated or empower yourself to deal with the issue on their behalf. Such action will not be tolerated since it quickly spins out of control and the consequences are irreversible. Such unwarranted action almost never remedies the issue but hurts and brings disrepute to all of us Tacoma owners and enthusiasts.

 

Being aftermarket components, they may not sit the same way as factory parts would, they may be longer or shorter depending on the manufacturer. Again, just my .02 as Stefen is the only on that would be able to say if in fact they are truly pressed together properly or not. If he is unable to tell, he might want to run it by a machine shop or local dealer to verify before installing.

 

Incoming to not clog up the derpa derpa

 

Personal attack

attack


Posting in the Banned Members memorial thread

Spewing misinformation

 

That wasn't mine, but that was my response to it that you saw. Either way, I am heading to bed and hope that this thread is still open in the A.M. for me to look at.

Again, that is all just my .02, take it as you guys will. I am not defending the OP in any way other than giving my opinion. What I will say, is the OP has offered a refund to Stefen if he sends it back, that seems good to me, just make sure the OP pays shipping as well.

 

Then seeing what? Everyone jumping down my throat for something they are comparing pictures to and are obviously uneducated on?

Do as I say, not as I do should be in the rules.

 

That is very commendable of you!

I know Kevin personally and he is a stand up person in real life.

 

Kev your going to have to make a new thread after this derpness.