Wheel Bearings & Hubs Press Service *** OE NSK ***

*** NSK Bearings ***
Original Equipment

I DO NOT HAVE A WEBSITE
I DO NOT SELL ELSEWHERE
ONLY FOUND HERE


Fits
Tacoma 2005-2023
4Runner2003-Present
FJ Cruiser 2007-2014
Lexus GX460 2010-Present
Lexus GX470 2003-2009


4x4
$360
YOU RECEIVE THE SET, AS PICTURED


PreRunner 2WD
$495
YOU RECEIVE THE SET, AS PICTURED


FREE SHIPPING USA CONUS +HI +AK
Canada +$120USD​

Terms of Sale
Inspect the parts upon delivery for press service satisfaction.
If any discrepancies are found contact me IMMEDIATELY.
Do NOT attempt to install if any discrepancy is found.
To expedite shipment, I preorder and keep parts on hand;
payment reserves next available pair when not in stock.
I am a press service,
no other services or conditions are to be assumed.
Everything pictured is included.
All sales are final, no return for refund accepted.

Warranty
Provided by manufacturer, their conditions apply.​

​

4x4 Install​

Torque CV axle nuts to spec with a calibrated torque wrench.
A loose assembly shortly after installation means your CV axle nut lost it’s torque.
If the axle nut loses it's torque, forces acting on the assembly will ruin the bearing.​

Loan-A-Tool
Torque Wrench (173 lb ft).....
Socket (35mm)......................
Puller (if difficult to remove)
Loctite 241.............................

Install tips
Wire brush CV stub splines of rust/grime, wipe and apply anti-seize to splines (not threads)
After insertion thru hub, clean stub threads with solvent, dry and then sparingly apply Loctite 263
Torque axle nut with wheel on the deck​

Seals:
Not included
Knuckle....90316-A0001
CV............90304-A0001​

Outstanding:
Buenotaco2012
mk5

PreRunner:

 

Sub

 

@05Taco4x4 do you have the ability to do Prerunner hub assemblies as well?

 

I do, you need a set?

 

I might, but I have a few questions..

- Do you use a Toyota hub flange for the prerunners? I've heard that they don't make an aftermarket flange for the 2wd prerunner trucks

- Do you include a Toyota lock nut with these? (I believe this is a prerunner only part)

- What is the cost for two prerunner hub assemblies? (both of the bearings on my truck are bad)

- What else, will I need, besides what you include, to bolt these up and get my truck back in working order? I'm guessing maybe inner wheel seals?

Thanks in advance,

Robert

 

Yes, there's no alternative hub.
Yes, there is a lock nut that keeps the hub tight against the bearing.
My hubs come with the O-ring, that is sandwiched between the bearing and steering knuckle.

 

Thank you for all the info. Whats your lead time like on a pair of these?

 

However fast the components get shipped to me, I have them in mail the next business day (3-day shipping). I probably won't ever stock PreRunners.

 

Completely understandable, I assume there's much less demand for them. I will keep you posted in the next few days as to whether or not I am going to go ahead with the order. I need to see if I can swing it this time around when I get paid, or if it is going to have to wait.

Thanks again for all your help sir

 

I am going to hold off on buying these for a while. I went with a dorman assembly to get my truck back on the road until i can afford to fix it properly with an OEM bearing. Definitely keeping you in mind for future reference though as my truck seems to eat through front bearings every 30-40k miles.

Thank again for all the info, its good to know there are members on here than can provide a quality assembly for prerunners & 4wd’s

 

I'm glad your truck is rolling, no worries I'll be here

 

Payment Sent!

 

Thanks again 05Taco4x4 for the bearings. Fast response times and shipping as well. True to his word on components. Went right on after I got the old ones off(rent a slide hammer at O'Reilly's. Don't be a hero like me). Also replaced the rotors and pads while I was at it. No more slack in the steering. Wish I would of done this sooner.

 

Awesome, thanks for the feedback

 

Received all the parts! I just gotta install it now. Will be renting a slide hammer too . A+ Fast response/shipping.

 

I'm glad I could help

 

Do you have a set in stock? And how do I go about ordering it? Sorry I'm new to this site

 

Just replaced driver side bearing; believe the passenger is gone now.. Thinking about a pair of these right before i put on new tires.

 

PM me when you’re ready. I currently have two pair on hand. I’m out of town, return Monday morning.

 

BUMP, no more wheel bearings noise! I finished the passenger, but I didn't replace with the Timken seal.
I wasn't sure how to pop it out, and the one in there looked alright though. Still have the other one, but the road noise difference is crazy!