1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wheeler's 3 leaf AAL with TSB?

Discussion in '2nd Gen. Tacomas (2005-2015)' started by nibbs, Apr 10, 2012.

  1. Apr 10, 2012 at 6:53 AM

    nibbs [OP] New Member

    Apr 10, 2012
    Hey all-

    I was cleaning out my garage and found a 3 leaf pack AAL that I ordered from Wheelers a long time ago. I run 5100's all around, 1.75 at the front, and have had the rear spring TSB done a while back.

    I've added a bed cap a while back, and over the years, the springs just ain't what they used to be. They aren't bad, but with any load/towing- I'm riding looking at the stars (well, not that bad, but you get the idea). I'm sitting perfectly level now, where I used to have about an inch of rake. After searching and reading and searching some more- I'm wondering if anyone is running this setup- the 3 leaf pack with the TSB done, and thoughts on it. I see that some have taken the overload leaf off, and I understand I'll need to cut down the AAL, get longer u-bolts, not a bad idea for longer brake lines or to swap out for some longer travel shocks.

    Ideally there are other routes to go - BUT, I could live without doing anything, or use the kit I've got now. I've never had any vibe issues, I know it's been hit or miss for many with many different set-ups... so I'm crossing my fingers a bit there too, though being the rear, feel I should be OK as I've not had any with the lift up front.

    Thoughts are appreciated- thanks!
  2. Apr 29, 2012 at 8:58 AM

    DevL Well-Known Member

    Feb 23, 2010
    I have the ICON 3 leaf with TSB and no overload. It ups the ride height 1.5 inches unloaded. Seems perfect with 200 to 250 pounds in the bed but way too stiff unloaded.

Products Discussed in

To Top