Will this work......lift/tire/wheel combo?

All, I am currently running 285/70R17 on 17x9 wheels with a leveling kit on my 08 Tacoma......I have a goal to have completed by the end of March but I wanna make sure its gonna work....Plan is to add a 3 inch body lift and put a set of 35x12.50 on a set of 17x10's? Is anybody running this combo or know if it will work ???

 

U'll probably get some rubbage. Guys with 6" lifts even rub with 35s from what I've heard.

 

Body lift is dangerous. Remember the only thing holding the body to the frame is 4 pieces of plastic. Other than that you should clear fine. The issue with rubbing is the cab m

 

Sorry issue is cab mount which i believe is raised so problem solved try and find 1" body lift

 

i dont do any hardcore muddin with my truck so the body lift should be fine...i just dress mine for the look....no need in trashing a nice truck...ive had plenty of that in my past!!!

 

anybody else got any ideas on this combo? will it work?

 

You'll never get bigger tires to clear with a body lift. Period. The cab mount under the A pillar would have to be relocated. Do that, and you will clear 35's on 6" lift with no rubbing whatsoever. Not gonna happen with your idea though.

I'm running a 3" lift and the tires I have are positively as big as you can go on 3". 285/70/17's. They're meaty so much bigger than they seem. I trimmed almost all my plastic fender insert out and I rubbed for quite awhile until they wore down a little.

Get a 6" and you can 'clear' 35's but you will still run into rubbage in the same spots.

 

i already have a 3" levelin kit and i clear my 285/70R17's with not problem, no matter what the terrain is. Absolutely no rubbing. How would i not be able to clear 2" more of tire by adding a 3" body.

 

anybody else got an opinion on this set up???

 

bump