Wiring Camper shell brake light

Any good sites on "how to" or what wires mean what? I have 2011 Tacoma Access and bought a l2007 eer Z series cap used?

Thanks.

Paschal

 

Assuming that the 2011 is the same as the 2010:

Remove the two bolts which secure the taillight. Pull the taillight straight back to remove. Connect the shell brake light positive wire (probably red) to the blue truck taillight wire. Connect the shell brake light ground (probably black) to the white/black truck taillight wire.

The wire colors above and below are on the truck side of the plug, not the tailight side:
Red: Backup
Green: Tail
Blue: Brake
Yellow: Left Turn
Blue/White: Right Turn
White/Black: Ground

 

i know this is an older thread, but i was having similar issues. thought this might be helpful

http://www.etrailer.com/question-6256.html

)
edit--- on 2012, blue/brake wire is on truck side of plug (still)

 

Sub for later