ANOTHER EIBACH+5100 QUESTION

I couldn't find exactly what I need to know using the search, not saying it aint there but I couldnt find it.

Anyway my eibach springs and bilstein 5100s came yesterday from toytech and I cant wait to get them on. I would like to get everything assembled before I take my stock parts off ( I'm down to one ride for a few weeks) at a shop and do the install myself. I found someone who can do it they just need all the parts ( washers, bushings, new top hat). I was thinking going this route would make the install quicker and easier.I also got the AAL and 1/4 top spacer but I think I have that part covered by reading other posts and instructions on here.
Where can I find the parts that I need without going to the stealership? Is this overkill or a waste of money? Can anyone post a link with the order of the bushings and washers?

As always thanks for your replies and sharing your experience

 

Well, here are some links that I have Sub'd to:
Torque specs:http://www.tacomaworld.com/forum/2nd-gen-tacomas/318116-torque-spec-guide.html
Your 2007 top hats should be reusable, you could use this method, but if you don't feel comfortable, don't do it:http://www.tacomaworld.com/forum/suspension/211535-billstein-5100-easy-install-method.html
Add a leaf install:http://www.tacomaworld.com/forum/suspension/54186-aal-install-second-gen.html
Top plate info:http://www.tacomaworld.com/forum/2nd-gen-tacomas/297050-strut-mount-questions.html

 

Another helpful link(go to page 8 for pics):http://www.tacomaworld.com/forum/suspension/31862-how-front-shock-spring-removal-8.html

 

And a part diagram:http://parts.camelbacktoyota.com/pa...iteid=214329&vehicleid=190117&diagram=8512295. Need parts 20,21,22 maybe six number 19 top hat bolts just in case you damage one

Edit!: Check Out rockauto.com also, they have top hats for cheap! (Relatively)

 

Thank you so much! This is exactly what I needed to know.