3rd Gen Remote Start Using OEM Remote

Install done, works great. I have no electrical experience. I initially used the tap splices and couldn't get it to work. The people at Voodoo were great and answered the phone sunday morning at 11 when I called. They walked me through a few steps as well as telling me to T splice. I did that and everything worked great. These forum's are great, people like @GoGoStAm and the people at @KBVoodoo make this stuff so easy for even the novice Tacoma owner. Thanks again.

 

Saturday I conquered the oem remote start... Sunday I failed the smart start... USB flash is on order to enable the smart start in the

$63 evo-all - universal all-in-one CAN bus data interface and transponder immobilizer bypass module

evo-all.

 

got my remote start installed the other day. can control with factory fob or mobile app via smart start. purchased the only true 95% plug and play system available. they hope in the next few months to have a complete plug and play system. id highly recommend it for your tacoma. see below for install writeup, purchase location, and in use videos

great guys to deal with!!

truck is a 2017 tacoma PTS


available at:
http://www.ebay.com/itm/272510643020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

and https://www.12volt.solutions/collec...coma-highlander-plug-play-remote-start-system

**mention Matt or midvale496 when purchasing**

*****USEFUL LINKS*******

INSTALL WRITEUP https://drive.google.com/file/d/0BxMd_h2OfnBxVnBDeVpEcEtzeEE/view

smart start mobile use video:
https://youtu.be/oSSx4l2fULE

factory fob use video:
https://youtu.be/pkpFvYRLDdQ

enjoy

 

Has anyone done the DIY pop and lock mod on their 16+. I was thinking about the hole that I drilled in the tiny piece of plastic. Now I'm subjecting it to 3 additional locks each day, in the cold when plastics are most brittle. Time to consider some reinforcing options?
https://www.tacomaworld.com/threads/power-tailgate-lock.393110/#post-10844160

 

Looks like that's the @FullMotionHT unit also referenced here. Good on him for figuring out that the

$59 DBALL2 Databus All Combo Bypass Module

DBALL2 will work with an alternate configuration from the manufacturer's instructions. Using an OBD2 harness and pulling power and ground from it instead of the other locations is a great idea to save three factory harness connections.

Not sure how four wires tapped instead of nine is 95% but whatever.

BTW, glad you liked my SmartStart module install location.

Why? What do you get from people mentioning your name or Youtube handle?

We also have the lower priced @KB Voodoo option, using the same DEI DBALL2 module, who is a TW Vendor supporting the site. Or the even lower cost roll-your-own DBALL2 option I wrote up.

It's a nice thing that folks have options. Let's not cloud the picture for the TW community with marketing-speak.

 

Probably this.

 

I have the pop n lock.. evo all and evo smart start.. I'll let you know down the road if I have problems.. I've probably started and stopped my truck 100 times in the last two days installing and reinstalling troubleshoots... now it's done done done

 

I've installed

$59 dball2 databus all combo bypass module

dball2 a while back but now realize that I did not install an inline fuse on the 12V. Do I need one? I didn't see any fuse mentioned on any of the threads or I've missed it. Any thoughts?

 

See my answer that I posted in the other thread where you asked this question...

Link: 123

 

Just installed this remote start. It was supper easy I had a couple of questions and Clay got right back to mexplore and had installed within a half an hour. Great support thank you

 

Thanks X2

 

Hi Guys I installed my KB voodoo remote start and its been working fine. Today I used my remote start (it was left in auto lights mode) and when I turn on the headlights, the indicators dont turn on the dash board. The head lights work but not the fogs either.
Any ideas? Worried about my drive home from work tonight in the dark.

 

Funny, same shit happened to mine, but i have an MT with the compustar system with the bladeal bypass.

I took it back to the shop and they checked the wiring and must have reseated the wiring and reprogrammed it and it's working ok now, just one day though.

If you leave it parked for 1 hour it will work again.

 

Hmm ok, I can pop out the

$59 dball2 databus all combo bypass module

dball2, unplug it and do the learn programming. But I'll report back if the 1h thing does it too when I leave for home. Thanks

 

who wants a free remote start? I need a favor.

 

W

what kind of favor ?

 

I'd guess he's testing a setup and want someone to install it and see if it works.

Just guessing though.

 

Is there a work around so the truck won't turn off as soon as the door opens or the brake Is pressed? Just got mine, live it, but only thing bothering me right now...

 

Same answer here as in the other thread you asked this question in.

 

Apparently not on the Tacoma. It would be nice if someone figured it out. I know the new Honda's with push button start don't do this.