What Have You Done To Your 2nd Gen Tacoma Today?

Used it to pick up tires for the gx - 265/70/17s - not quite as big as the 285/70/17 on the Taco...but still a nice addition.
Bilstein 5100's up front for a 2" lift, 1" spacers, no rubbing, makes it feel a bit more like a truck!

 

Lucky you caught that, more than hand tighten next time perhaps .

 

These cup holders came out of my old Xterra, not sure if I’ll keep them

 

What’s crazy is I remember using my torque wrench to tighten it down.. I think I need to get that sucker calibrated because something obviously is not right.

 

Hi y’all just picked up my 1st 2nd gen tacoma it’s not 4x4 but it does the job . Got it from original owner for a great price . Gotta say I love the 4.0 !

 

Changed spark plugs and cleaned throttle body along with oiling my K&N CAI





So I decided to treat myself after treating my truck

 

I did mine for this summer, never changed (touched) spark plugs prior, and it was easy! So easy in fact, it gave me the courage to change the one in my snow blower!

 

Looks great!! what size tire are you running? I run a 275/70 r17 and feel like my tires are way to small, especially with my new lift

 

Thanks man

285 70 17

 

Did you have to chop the cab mounts or trim? I rub some on my front inner fender now with the 275

 

I definitely had to trim some fender down. I also need to chop the cab mount eventually. But it’s on the list lol. Daily driving is no problem what so ever.

 

Well enough people asked, so I decided to share how much the wrap set me back. Thanks to @Falldownhard for providing the sweet pic for the outro!

https://youtu.be/rAsYY3WQ2VA

 

loaded the fridge for the weekend

 

Finally got my glorified door stoppers back from powder coat, just in time for mall-crawl season.

 

Thanks!

 

Just wrapped up putting a set of 884's with 5100's and some stock replacement UCA's on the front. Off to the alignment shop tomorrow morning. Took it for a quick test spin and all I can say is that it is much softer than the stock coil overs with 5100's set at .85. I have a steel bumper, so hoping it will settle in about the same height as before the steel bumper addition. Anyone want some stock SR5 coil overs with 200k on the springs and 150 0n the 5100's? Will also have some stock UCA's with 170k on them (could use ball joints). Going to be doing the rear 5100's probably Monday.

Wow, my hands hurt!

 

Swapped out my tires to brand new 255/80/17 cooper discoverer st maxxs. Love them so far! Also changed my oil and installed a fumoto valve.

 

Best oil jug on the market.

 

I bought them off of a member here but they are HPS brand.

https://www.google.com/url?sa=t&sou...ose-kit.html&usg=AOvVaw32W7490uVjMrYLeZx2oCrN

 

Thanks