Anytime Front and Rear Camera Mod

Try here for an alternative:
https://www.tacomaworld.com/threads/anytimebackupcamera-com-install-front-and-rear-cameras.567192/

 

Shoot, link is still dead.
Was hoping to get the full kit like presented in this post. I checked out the other link Fredgoodsell posted and it seems more pieced together.
Rats.

 

Nope but I picked up this from another member a few days ago. Serves and does the purpose well. Best of all...no extra buttons to add! Uses your factory MODE button and seek +/- to toggle between the cameras on your steering wheel.


https://car-solutions.com/en/rfcc-ttg2-car-camera-control-system-for-toyota-touch-2-entune.php

https://vimeo.com/313686864

 

That's pretty legit! Didn't even know you could do that. Call me old fashion, but i do like a switch. This is very cool though.

 

The use of existing hardware helps to make room for more buttons

 

Got the same rocker switch and my question is how to make this to light up for ACC and also able to switch to front camera.. thanks

 

Will the front camera mod work with the non-upgraded head unit. The cheaper one that is touch screen but still has buttons around it.

 

I'm still looking for a DPDT switch that fits into the right hand side blank - if anyone has found one.

I got a (DPDT) toggle - but it doesn't fit into the hole cover. It's too big.

Sure would be nice to clean it up...

 

Do you mean the small square shaped switches in the center console? If so, I have not, the closest solution I have been able to come up with, is to use a traditional SPST pushbutton controlling a 5 pin automotive relay, and use the N.O. and N.C. pins on the relay. Full transparency, this set up is normally used to control on /off power to some device, i.e. light "A" and light "B" .

 

I got a cali rasied cubby panel and filed the hole a little bigger. I couldn't find one that fit the standard tall slots.

 

https://www.anytimebackupcamera.com/product-page/FRswitchtoy

This fits the small Tacoma switch slots.

 

I wonder if a guy could get that switch without lettering and use it to control 2 anythings? I guess I could also color over the lettering with a sharpie.

 

Certainly could. Print labels.

 

Are these still Available? None of the links are working for me.

 

Me too. No links working.

 

I just installed this today and it works pretty good. Did you try to hook up a third camera? It looks like it should work.

 

@Clarky4×4

 

Dope! Glad you like as well. I know there's other methods out there for this mod but this is by far the easiest and simplest one. Not yet...I know the other lead is a 6v and alot of available camera's need a 12v. I was thinking just tape the 12v lead from the front lead for power and plug in another camera and yes it should work.

 

https://www.tacomaworld.com/threads/anytime-front-and-rear-camera-mod.542285/page-47#post-19722268

https://car-solutions.com/en/rfcc-ttg2-car-camera-control-system-for-toyota-touch-2-entune.php

 

Oh that’s cool. Do you have that one?