coilover removal

Didn't see anything on youtube that could help. Anyone know a video or other form? Bought a used 07 in 2010. Time to rebuild. Haven't had to remove a set of coilovers before. Just standard shocks.

 

Did mine a couple weeks ago, this thread was perfect:

https://www.tacomaworld.com/threads/how-to-front-shock-spring-removal.31862/

 

are they the stock assemblies up front? if so, you have to disconnect the UCA from the spindle at the balljoint, might have to remove swaybar to gain some clearance too. then remove lower (1) / upper shock bolts (3), but not the upper center one, out she comes. unbolt / detach clips on the brake lines / abs lines from the spindle / uca so they dont pull to tight when the spindle drops.