Should traction control button be illuminated?

2013 TRD (Baja). Noticed mine is dark while Mine is dark, when fog lights, DAC, Diff lock, RSCA are lit.

I am guessing it should be lit, seeing the picture linked below.

Need new button or the lamp can be easily replaced?

Thanks!

 

Found the answer:

https://www.tacomaworld.com/threads/how-to-replacing-2nd-gen-fog-light-switch-bulb.361300/

 

So the amber bulb part # is 90011-01058.

I need green, and I have hard time finding the correct part #... anyone?

 

I need to do this as well
I have a couple burned out I guess as well that I always thought never lit up

 

Priced out a used one? I thought those where LED, not a bulb?

 

Looking up Toyota part numbers is so fucked up. So much easier finding stuff for Subarus. Software can be downloaded easily and there are good online catalogs with diagrams.

 

Part code is

84988J BULB, DOWNHILL ASSIST CONTROL SWITCH

But still cannot narrow down the actual part number.

 

Have you checked here?
https://parts.toyota.com/p/Toyota_2...CTION-CONTROL-SWITCH/63284562/9001101058.html

 

As if the part # wasn't available for 2012-2015:

http://toyotamarket.ru/us/674470/001/4/8401/10/

 

Wow, $82
https://parts.toyota.com/p/Toyota__Corolla/SWITCH---TRACTION-CONTROL/63362758/8498802030.html
I put in 2011, wasn't sure what year you had.

Hmmm somewhere along the way it switched me to Corolla, wtf.


Here's the Tacoma, 09-12

https://parts.toyota.com/p/Toyota_2...H---TRACTION-CONTROL/63297861/8498804060.html

Toyota: 1 models, 16 variants between 2009 and 2012.

 

Yeah these part catalogs are total garbage.

 

Are the steering wheel controls in a '14 supposed to light up?

 

I think the best bet is 90011-01018. It is shown for clutch cancel switch (the only button apparently with replaceable bulbs). At least it should be green.

 

Ask our resident parts dealers w/TW discounts... Gunny1005

 

Does anyone know what or if this bulb can be replaced with a led bulb and what size led bulb it would be ?

 

Subd for outcome as I noticed my trac switch is out this week as well.

 

I pulled my Trac switch out today along with the downhill assist and rsca off and the bulb is the same between those three.

 

It is a t3 neowedge if you want an LED replacement. Beware though it needs to be about the same height as the OEM bulb otherwise the switch won’t actuate.

 

Very good to know that you maybe I will leave well enough alone

 

Is the 4x4 switch suppose to light up as well ? Maybe my bulb is burned out of it as well ?