Raleigh North Carolina and surrounding areas

JBA's

 

I think we saw at least 1 clip on townville tims, one side was adjusted for taco lean.

 

What Jimbo said and I saw a pic where it looked like there were 2 notches under the spring mount. They come preassembled so not many take them apart and mess with all that.

 

What all are did you decide to go with! Those look nice!

 

Yeah, the drivers side was up one clip space. Whether the passenger side has the extra groove, i don't know.

Edit: and from what I've read, they are not adjustable beyond that.

 

@Sandman614 Here is some info I found and the pic in question.
https://www.tacomaworld.com/threads/ptr13-35150-bilstein-trd-pro-kit-upgrade.530072/

https://www.tacomaworld.com/threads/new-discount-price-on-trd-pro-suspension-kit.534207/ first post pic looks like there are 2 clip grooves showing.

Coil spacer kinda like moving the lower mount up to accomplish more lift on a Bilstein.
http://toyteclifts.3dcartstores.com...JA-and-Pro-Edition-Tacoma-4Runner_p_1065.html

 

6114 kit upfront, 6150 out back with dakars
..

 

What brand are those from
What dakars did you go with? That sounds like a really good combo. MOD day at your house soon then to get all that installed.

 

HD Dakars...

 

EAF what are you going to carry that you need the HDs? The only thing is the length of the 5160s they are good to ~2.5" of lift they may be getting short on extension for the dakars if they end up giving you a full 3"+ of lift.

 

I got curious and had to do some digging. Here's a pic of the baja kit which doesn't come assembled. Supposedly, the only difference is spring rate. It looks like there are only two clip ring grooves on each. They have the ring in the top on the right for the drivers side. @Sandman614

 

So it only comes with 2 slots bummer!

 

Check out these idiots trying to capitalize.

https://www.ebay.com/ulk/itm/173211977545

 

When they first hit the market they were that much it wasn't until recently they dropped to what you got them for and that's when everybody went crazy and killed the supply!

 

That's what I had been seeing in Toyota ad pics was the 2 clip spots. The regular Bilsteins should have more adjustability. You went the better route @voz.

 

I'm fat, rear bumper with tire swing out, plus whatever else you fuckers on here convince me to do...

 

Yeah they have 4 slots the 6112s won't get you a full 3in in the front unless you put a 1/2" spacer on the upper mount or go the route I did and get them preassembled (lazy) from toytec with their alum. top hat.

@voz I love my set up of 6112s they are really good, great choice!!!

 

Plus if you have weight, the pros are only 600# springs. But for what I'm doing and wanted, $600 was on point.

 

Shell!!!!! you need a shell or bed bars, RTT from either Alu-cab or James Baroud! High lift shovel ax all of which you carry on the truck at all times.

 

That was the price i was seeing them at. One place was even $1800 before the price drop.