Lifting and leveling a 1996 2wd 5lug.

Hello everyone I am a new poster I just create an account on Tacoma world. I have a 96 2 wheel drive 5 lug. I want to lift it and level it but not too much. I was wanting to do a 2- 3 in. Lift on it and level it out I understand that 5 lugs take shorter shocks but if I were to lift it 2 to 3 in either spindle kit or spacers would that require a longer shock like one that of a 6 lug. If anyone has any info on this I'd appreciate any advice and information you can give me and what items I would need I was thinking of doing some Bilstein 4600 shocks for a 5 lug but was concerned that if I lift it up with either spindle or spacers and an AAL that it will be too high for a basic 5lug stock that is normally shorter than a 6 lug shock so I just needed some more advice on the subject. Thank you all in advance

 

fabtech spindle kit only changes the spindle so stock shocks are fine and u get 3” of lift. In the rear get lift shakles. You will need longer shocks for that after. More info in either my build thread of the lifting a 5lug thread
https://www.tacomaworld.com/threads...d-with-general-1st-gen-5lug-lift-info.536614/
https://www.tacomaworld.com/threads/the-lifting-your-5-lug-guide.518620/