TRD OFFROAD Hood Vinyl

If you don’t have time to read then maybe you should rethink buying a vinyl wrap for your truck so you actually have time to do it correctly.
BTW:
1) Spell my name correctly.
2) I wasn’t being mean at all. I literally answered your question and gave you the users name and you still asked the same question.
3) I normally have patience for people asking questions, but you are obviously too lazy to even read the posts that are answered for you.
4) Hopefully you find time to at least read the instructions provided with your vinyl. That is... If you have time to purchase it. Have a good day and change your tune if you expect help on this forum.

 

Purchase information also literally on the first post of the thread.

 

Relax everyone focus on the point of the thread.

And a big thanks again to @mcmnos4r2 for making this possible.

 

Thanks to you and all on tacoma world for pushing me to make these .

 

Thanks @mcmnos4r2

Just added your extra wide version with "TRD Off Road" on it. I'm not completely centered at the bottom but it's darn close. I'm super happy!

Tips:

-Have someone help you. Don't try it alone unless you are a professional. My wife held the decal while I peeled off the paper from the adhesive side. She then helped me place it on the hood. She then helped me try to center it. Lastly she helped squeegee it. So yeah a second set of hands is a must.

-Rapid Tac Fluid Film worked great. It's very forgiving when moving the decal around.

-Get something good to use as a squeegee. I used reusable plastic spreaders of the kind meant to use on fiberglass installations.

-Don't apply directly under the sun because the vinyl gets hot and stretches. I parked in my garage a little so as to be in the shade.

-When peeling off the paper on the adhesive side be careful with the center of the "O" as they can come off easily.

- Mine is not exactly centered. Next time I will cut the paper as close to the vinyl's rounded edges as possible so that I can see with more precision where the rounded bottoms of the decal are going to end up.

All in all not bad for a first time install of a larger decal.

 

Done!

 

Which decal is this? Is the lettering hollow?

 

Click here for the decal details. It is the Extra Wide version. The letters are cut out so what you see is the hood.

 

Truck looks awesome. Inferno is growing on me.

 

If you painted that chin bumper black like your grille, that would look really slick!

 

It is black. Just shows lighter in the photo due to the light reflecting.

 

Are you referring to mine? If so it's Barcelona Red, not Inferno. The reason I like the color so much is because it looks different depending on the light and the angle you view it from. I think it really is the only color that does this.

 

Er yeah I guess Inferno is orange ain’t it? My bad. Still looks great! My Cement color shifts too.

 

Which size is shown in the pic, the extra wide?

 

If it hasn't been mentioned already, this would be great to have for 2nd Gens!

 

Yes. Extra Wide.

 

They're available

https://www.tacomaworld.com/threads...ack-tacoma-hood-stripes.540878/#post-17675171

 

Outstanding!

 

Just PM the guy to order.

 

Which size decal is on the Quicksand pictured?