Orange County CAF's: up to no good

you mean this? https://www.tacomaworld.com/threads...-complete-save-custom-built-available.288055/

 

Sorry I wish I could stay longer for the front one. Hope front install went smooth.

 

I swear I saw one laying around in your garage, by the sink

 

Yea I bet! It would be a lot easier if that damn core is lighter, but nha it’s heavy AF

 

Someone’s obsessed with Brian. How sweet.

 

^!

 

Hmmm

 

Silt yesterday was horrible, it was like driving through soupy mud..needs a snorkel mod

 

@MadTaco461 Mike, I think you do this as well to your tank?

Been too long since I last did this!!! Gunned the gas ON/OFF on the fwy today as well right after adding this and a new "fill-up".

EDIT: I've used this stuff for, literally, a couple decades!!!

 

I feel like this has been mentioned before, but you guys race 1500 class? We just did silverstate in 5u. Sheared spindle at mm117, thankfully the Cobb bros (6066) ran a spindle out to the car and we were able to salvage a 2nd place. Our 1500 car hasn't been out in a minute though

 

That's awesome on the 2nd place, I love those 5 cars!
We've been running a 6100 for the last year truck but it wasn't ready. So we were asked to run that Class 1 car , we also ran that car at Parker 2 years.

 

We picked it up as a roller from Jake's fabworks last year while our fusion 6100 truck was being built, but word on the street is he (brian I think?) bounced out of the deal. So still looking for a 6100. Haven't spoken with the owner in a minute but I think they were just going to pick up a used one and try to update as needed.

 

This is better Randy @WileECoyote Recommended by Lexus and Mercedes dealerships that my sister works at

$14 Chevron Techron Concentrate Plus Fuel System Cleaner, 20 oz., Pack of 1

https://www.amazon.com/Chevron-6574...id=1525653224&sr=8-2&keywords=chevron+techron I use it every other oil change

 

Well took the passenger side rotor and caliper off to check the 4 bolts that hold the bearing/hub on.
They were all tight.

Is it possible for a bearing to go bad in only a few weeks?

 

Dust shield looks out of the way and no rubbing noise when I jack the truck up and rotate the wheel.
CVs also look in good shape.

There is a hummm/growl when driving again.
When the truck is jacked up there is some play when i grab the tire and wiggle left and right but not when I grab it from the top and bottom and wiggle it.

Off-Road and occasionally on-road when I enter/leave drive way fast I got a poping sound from the passenger side.

 

can't explain the howl noise.
A buddy had a popping noise in that same exact situation and ended up being a bushing on his stock lower control arm on the passenger side. Plus his lower ball joints were worn which made it difficult to diagnose.

 

LCA were replaced with TC LCA a few months ago.

Just greased the bushings and have uniballs instead of ball joint for the LCA.