2003 4Runner Limited 4wd V8 FJ tcased overlanding rockcrawling do-it-all build

What's that mean? I know nothing of injectors.

 

2008 solara inecjtors seem to fit the bill. but a full set of new ones is 680 bucks. so keiths is the route i shall go

 

I'm kind of wondering tho. The injector I posted doesn't have any Toyota part number on it. Is that normal for an OEM used injector? I should look at the other 2 sets of stock 4runner injectors I have.

 

It’s not an oem injector. It’s a denso aftermarket.

 

Looking at it closer, it looks like the part number was actually removed. Maybe Keith is doing that to try and prevent people from sourcing injectors themselves.

 

doubt he is. theyre just injection molded without the OEM part number because its a denso aftermarket. same mold. just no toyota on it for gobs more money

 

Cherry rig man,lovin’ the sequoia wheels!

There’s an ‘08 4.7 for sale round my hood and been thinking of trading my ‘15 taco for it.
Then I’m like

 

Did some further research this morning.

The pink injectors are Toyota 23250-0A020/Denso 4400 injectors. I verified the ohm resistance so I'm pretty positive these are a match.
Fuel Injector Specifications
Long size, Sumitomo port
Resistance: 12.8 Ohms (I measured 12.8 on the broken one)
Static Flow Rate: 255 cc/min (I found one site that listed these at 288cc)
Fuel Pressure Rate: 3 BAR
Fuel Nozzle: 12 hole, disc-type

Found a couple places to buy them individually:

https://www.fiveomotorsport.com/232090a020-denso/ - Pricey at $53/ea but they are for sure going to be original Denso for that price. Listed as new parts.
https://www.injectorplanet.com/products/denso-4400 - Much cheaper at $18/ea. Maybe rebuilds? Or fakes for that price?

For shits and giggles, I checked my original 4 hole injectors. They are a greenish-blue.
Toyota 23250-50040/Denso 3420
Fuel Injector Specifications
Long size, Sumitomo port
Resistance: 13.5 Ohms (I measured 13.1/2 on mine)
Static Flow Rate: 250 cc/min
Fuel Pressure Rate: 3 BAR
Fuel Nozzle: 4 hole, disc-type

 

Take a look at this. This is why I was thinking the part # was removed. Note the arrow pointing at what looks like the remainder of a part #, a partial 0. That would match the Toyota part # I found listed above, 23250-0A020. Just speculating.

 

Forgot to post about this. While I was doing the timing belt, I received the WeatherTech floor mats I had ordered the week before. I really like them, much nicer than the OEM rubber floor mats the 4runner had when I got it. It also had the OEM carpet floor mats under those when I first drove it home. Both were nasty so the carpet ones were thrown away immediately. I used the rubber ones until the WeatherTechs came in.







The buttons you see on the front floor mats do not come with them. I added those, just plastic trim button things, to keep the floor mats better secured in place. They already fit very well with little movement but now they don't move at all. I only needed one on the driver side, just to suck the mat up to the kick panel better. Rear doesn't need them at all.

 

I just did my front diff few weeks ago, same nightmare. I rounded the nut. I drained the oil (drain nut came easy), filled with the 12v oil pump that i had used for tranny oil change in the past. It was a breeze. Toyota should have just put a square head like the lawn mowers have for draining..you can just use the end of your 3/8 wrench.

 

if you don't mind me asking, how much did you pay for this 4runner?
I'm gonna be in the market for one soonish.... family keeps growing.

 

$4700 was the initial purchase price here in AZ.

 

Man, that's a badass 4R someone will get.

 

The Lexus GX470? (not sure I have the model right but the equivalent to the 4runner) has a square head drain plug. You can only get it from Lexus however. I'll post up the part # if I can find it

 

Haven't made that decision still. I'm kinda leaning towards maybe (MAYBE!!!) selling the Taco.

 

And here I'm excited to post my own 4R build once its in my hands.

Stupid COVID delaying everything.

 

That the 3rd gen you've been talking about? So you ended up buying it?

 

It's been a done deal, the only reason why it's not in my hands is because I'm paying cash, and trading a firearm. I'm buying it from the service manager that I work with.

No FFLs are doing a PPT due to COVID

 

Shoulda done it here in AZ. FFL not required for private, person to person sales.