What Have You Done To Your 2nd Gen Tacoma Today?

A little exhaust mod today. Flowmaster Delta 40, routed just before rear axle.

 

Had lil pickup painted at Maaco with my stimulus money. Good enough for my neighborhood!

 

Back to having a camper, found a great deal on OfferUp for one with a rhino rack. Color match this summer.

 

https://www.amazon.com/gp/product/B0867VS9PF/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

It does not come with LED's as the description suggests. I just got the LED's from here instead:

https://www.amazon.com/gp/product/B07YTVXPNL/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

I also ordered the weatherstripping since the original one sucks:

$29 RealTruck Extang Maxseal Truck Bed Tailgate Seal | 1140 |

https://www.amazon.com/gp/product/B000CN5QG8/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

 

I can see a slight bend in the middle, but I doubt it will make a difference when the topper is put on. I don't think you did anything, I don't see how attaching the clamps to the bed rail would cause this.

 

Added this Cerwin Vega 10in sub. For the price it sounds great with the upgraded door speakers and it fit nicely behind rear seat

 

When all else fails, read the instructions!

Thanks for taking the trouble to find the links!

 

My hood now has hydros

 

Installed my blacked out taillights yesterday afternoon. Not bad fitment at all. I thought I maybe should have gotten all red tails, but I like the full blacked out look.



Parking lights/ headlights on


With reverse lights on. I put in Vleds LED reverse lights since I thought the smoked housing wouldn't be bright enough


Parking, reverse and brake/ turn signals


Brake and parking lights on

 

Fog lights getting an upgrade tomorrow

 

Just use the bottom holes in the plate. It won't look the best but the plate won't block the light.

 

Your brake lights are on in the last picture? Your third brake light isn't working?

 

Hi, what is the size of your tires? And is your truck lifted or stock?

 

The Rockauto kit comes with all the pulleys and entire tensioner assembly, I only used the pulley on the tensioner assembly.

I've been hearing squealing on cold mornings. I figured I'd just do all of it all at once now, since the truck has almost 130k miles on it and I have no idea if it was ever done before now. Bearings wear out. Cheap insurance to swap them now.

 

That happened to me too move the rails out on the bed caps further. Wont hurt anything. The little pin the topper slides onto on mine was snug against the bed side.

 

Do you have the link to this air filter window mod? I can't seem to find it using the search function. Thanks.

 

Oh the brake lights weren't on...I had the hazard lights on and snapped the pic right when they were flashing. The brake lights and turn signals are the same LEDs. If you are applying the brake and have a turn signal on, the turn signal flashes on one side and the brake it solid on the other side. Not my favorite part of these lights (combined turn/ brake lights), but asthetically they look good to me. I guess I should have wedged something on the pedal for full effect...

 

Tires are 265/75/16 and I have a 1 inch block in the back with OME 884 coils in the front(5100’s all around)

 

Used it to pick up some lumber to start a shed build for the RTT and bed rack during the winter months. This bedrack I built for my RTT is coming in very handy!

 

Look closely at the pic, looks like he cut away near the hinge and then the opposite side where the latch is.