Rigid Industries LED Fog light kit

Not quite sold on these yet, but thinking about it. What do you guys think?

 

not bad look. hows the out put?

 

From Rigids site
Specifications:

• Watts: 11.25
• Amp Draw: 0.82
• LED's: 3
• Raw Lumens: 1125
• Lux @ 10m: 66.2
• Beam Distance: 162.7 m
• Peak Beam Intensity: 6,618 cd on the spec sheet.

 

Looks horrible...need to fit the D2 in there.

 

No

 

Yep! I can use my D2's as driving lights if I wanted to.

 

Yeah... Don't like them at all.

 

I can appreciate the uptick in light output that is gained by the LEDs, but cosmetically those are pretty rough IMHO. If you could figure out a way to retrofit those into stock housings you may be onto something.

 

From what I measured on my 2012..the fog lens are just under 3.5 inches in diameter.
For a clean install you need something like these:
http://www.ebay.com/itm/2PCS-12W-CR...Parts_Accessories&vxp=mtr&hash=item35ce8f486c


These are slightly smaller and square, but I think you could make them work too:


http://www.ebay.com/itm/10W-LED-Spo...Parts_Accessories&vxp=mtr&hash=item35c6e3b98c


These projector style are about the right size too. http://www.ebay.com/itm/2-X-20W-CRE..._Accessories_Gear&vxp=mtr&hash=item35cab9c38e




Good Luck & let us know how it turns out.

 

I'm torn about this decision. Wish they made a similar bracket that fit the D2's.

 

If there alot brighter.... I could get used to them.

 

they look alright, but I feel like rigid could have put one of their larger format D series in there. Since they're gonna be priced similarly (im sure) you could look into the PIAA 530 LEDs. One user just installed them on his and the kit has been out for a while now. Go to the lighting section.

 

I ended up going with the duallies on my set up

 

Yeah I don't care for them. I'd rather put a light bar in either of my grills and keep my fog light housings stock.

 

Good thread with a couple installs here - http://www.tacomaworld.com/forum/li...es-sr-m-fog-light-conversion-2012-tacoma.html