'14 stability control issues, help?

hi all, i have a 2014 AC 2.7 manual 4x4, after i put my 3" lift and 33" tires on it will engage the stablity control, and will nearly pull me straight through the corner, so i did what anyone would do, hold the TC button in for 5 seconds until it completely shuts off, so i thought. even with it all shut off it i try to take a corner fast it will still engage the stability control sometimes and make me almost go straight through the corner. im not asking for anyone to tell me how to drive i just simply want to know 1. is this normal to engauge when being shut off? and 2. what fuse can i pull to make it all turn offn abs 1 or abs 2? i had an 07 fj cruiser and i pulled the ABS SOL fuse and it shut all that b.s. off, i just want to do it to my 14 also so i can go out and play like i do in my good ol' 1985 toyota pickup? any help would be appreciated!

 

You need to have your VSC recalibrated

 

This...

 

The procedure is in the pdf file in the first post of this thread

http://www.tacomaworld.com/forum/suspension/41215-lift-vsc-answer.html

 

but even though it needs calibrated it shouldnt be kicking on when i shut it all off? does anyone know which fuse i need to pull so i can shut the annoyance off until i get it recalibrated?

 

Are you pushing and holding the button for 3-5 seconds while stopped or just pushing it ?

 

Kinda

but that's a whole other discussion that tends to bring hurt feelings and menstrural cycles

 

yes i stop completely, and push and hold untilbit completely shuts off, and it still kicks in if i take a corner hard. anyone know what fuse it is?

 

One of the 2 ABS fuses , let me look , hang on

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/206078-abs-rant.html#post4615935

 

Yep

Some people refuse to believe it's never totally off

 

This happens to me also in my 13. Apparently you cant completely shut it off after a certain year.

 

yes mine never shuts off totally and i wanna solve this

 

It's always been that way , same thing in my ' 09

 

it is very disappointing, pulled the 50a abs 1 fuse and so far so good, only the abs and traction light are on.

 

I see. I didn't realize that.

It is disappointing.

 

I wonder if there is a way to make the VSC computer think the truck is in 4low. If it's tied to the ABS computer, I guess you would loose ABS too though. I really don't know much about the computer crap though.

 

Yes , and despite Landphils post saying it's for non VSC trucks , it was subsequently found to work on VSC trucks

http://www.tacomaworld.com/forum/2n...locking-diff-write-up-pics-8.html#post5324525

 

Good read. I found that one or another one where the guy later tested how well it dug on a dirt road when slamming on the breaks. But on the trucks with VSC, I would like to know if that is a separate computer.

 

As far as I know , there is no VSC disable mod that doesn't disable ABS as well