1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2013 October batch for Devil Horns and Model T

Discussion in 'Diaz Fabrication' started by Andres, Oct 1, 2013.

  1. Oct 1, 2013 at 6:10 PM
    #1
    Andres

    Andres [OP] Well-Known Member Vendor

    Joined:
    Sep 27, 2008
    Member:
    #9514
    Messages:
    1,000
    Gender:
    Male
    First Name:
    Andres
    Hawthorne, CA
    Vehicle:
    Toyota Tacoma TRD off-road
    [FONT=&quot]Welcome to the 2013 October batch for Devil Horns and Model T![/FONT]
    [FONT=&quot]Devil Horns and Model T emblems have been approved for a small production under direct permission from Toyota Motor Company's Legal Department under certain rules and conditions. Please follow the simple rules that will help me deliver this emblem to you listed at the bottom of this listing, if it weren't for them I wouldn't be able to bring this product to your hands. [/FONT]

    [FONT=&quot]Pricing: [/FONT]
    [FONT=&quot]The price listed includes emblem (optional finish at additional cost on Devil Horns), necessary hardware for installation and shipping to all 50 US states and Canada. Tracking number is available to US residents only. International shipping is available, please ask for quote. [/FONT]

    [FONT=&quot]2013 October batch: [/FONT]
    [FONT=&quot]Batch is open for orders from October 1st until October 21st.[/FONT]

    [FONT=&quot]Finish treatment: [/FONT]
    [FONT=&quot]Emblems will be sent out for finish treatment around October 25th with an expected return date of November15th.[/FONT]

    [FONT=&quot]Shipping: [/FONT]
    [FONT=&quot]Emblems will ship as soon as they come back from finish treatment starting November 15th until December [/FONT][FONT=&quot][FONT=&quot]1st[/FONT]. Be advised that the shipping carrier will need a few days for delivery. [/FONT]

    [FONT=&quot]Model T[/FONT]
    [FONT=&quot]Model T is made of 100% American made materials, 6061 T6 aircraft grade aluminum 3/8” thick. Model T can be used in conjunction with mid bracket for original Toyota grilles or most after market grilles. Model T will have a black wrinkle powder coat finish with a top brushed aluminum finish followed by a layer of protective sealer applied by hand. [/FONT]
    [FONT=&quot][FONT=&quot]Model T will be a two-tone finish only; no other combinations will be available. [/FONT][/FONT]
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [FONT=&quot]Model T Prices:[/FONT]
    [FONT=&quot]Big Model T (emblem size 6.8 in. by 4.7 in, recommended for oval width 5.5in. and above)[/FONT]
    [FONT=&quot]Small Model T (emblem size 5.5 in. by 3.8 in, recommended for oval width 5.5in. and below)[/FONT]

    [FONT=&quot]Mid Bracket[/FONT]
    [FONT=&quot]Mid bracket is a mounting hardware required for the installation of Model T emblem onto OEM Toyota grilles. This bracket is installed between the OEM grill and the Model T emblem. While designing the Model T emblem, I came to realize that by having a standard bracket mounted on the OEM Toyota grille would allot me not only to mount other types of emblems, but also facilitate the fabrication process, minimize material use and diversify the use of Model T and further upcoming emblems. Mid Bracket is not needed if using mesh/satoshi after market grilles. Every Mid Bracket will be shot penned and have black hard anodized and brushed aluminum on the logo. (Below are products not yet treated for finish)
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    [/FONT]
    [FONT=&quot]Mid Bracket:[/FONT]
    [FONT=&quot]1995-2000 Tacoma (emblem width: 4.29 inches) [/FONT]
    [FONT=&quot]2001-2004 Tacoma (emblem width: 4.45 inches) [/FONT]
    [FONT=&quot]2005-2010 Tacoma (emblem width: 5.50 inches) [/FONT]
    [FONT=&quot]2011+ Tacoma (emblem width: 6.30 inches) [/FONT]

    [FONT=&quot]1999-2002 Tundra (emblem width: 5.08 inches) [/FONT]
    [FONT=&quot]2002-2006 Tundra (emblem width: 6.30 inches) [/FONT]
    [FONT=&quot]2007+ Tundra (emblem width: 6.69 inches) [/FONT]

    [FONT=&quot]1998-2001 4Runner (emblem width: 4.05 inches, drilling on grille may be required)[/FONT]
    [FONT=&quot]2002-2004 4Runner (emblem width: 4.72 inches) [/FONT]
    [FONT=&quot]2005-2009 4Runner (emblem width: 5.50 inches)[/FONT]
    [FONT=&quot]2010+ 4Runner (emblem width: 5.91 inches) [/FONT]

    [FONT=&quot]2003-2006 Rav4 (emblem width: 5.13 inches) [/FONT]
    [FONT=&quot]2006-2008 Rav4 (emblem width: 5.92 inches) [/FONT]
    [FONT=&quot]2008-2011 Rav4 (emblem width: 6.30 inches) [/FONT]

    [FONT=&quot]1992-1995 Pickup (emblem width: 4.02 inches) [/FONT]
    [FONT=&quot]2003-2008 Corolla (emblem width: 4.31 inches) [/FONT]


    [FONT=&quot] New emblems coming soon![/FONT]

    Batman
    [​IMG] [​IMG]

    Superman
    [​IMG][​IMG]

    Punisher
    [​IMG] [​IMG]

    [FONT="]Large Batman [/FONT][/SIZE][SIZE=3][FONT="](6.8 in. by 4.5 in, recommended for oval width 5.5in. and above)[/FONT]
    [FONT="][SIZE=3][FONT="]Small Batman[/FONT] (4.8 in. by 3.3 in, recommended for oval width 5.5in. and below)[/FONT][/SIZE]

    [FONT="]Large Superman [/FONT][/SIZE][SIZE=3][FONT="](6.8 in. by 5.0 in, recommended for oval width 5.5in. and above)[/FONT]
    [FONT="][SIZE=3][FONT="]Small Superman[/FONT] (5.4 in. by 4.0 in, recommended for oval width 5.5in. and below)
    [/FONT][/SIZE]
    [FONT="]Large Punisher [/FONT][/SIZE][SIZE=3][FONT="](6.8 in. by 4.7 in, recommended for oval width 5.5in. and above)[/FONT]
    [FONT="][SIZE=3][FONT="]Small Punisher[/FONT] (4.3 in. by 6.0 in, recommended for oval width 5.5in. and below)[/FONT][/SIZE]

    [FONT=&quot][FONT=&quot]Devil Horns, natural raw aluminum [/FONT]
    [FONT=&quot]Show below is an example of the texture after being fabricated; small visible marks left by the CNC machine are visible on the surface. People will often ask for a natural finish if they decide to custom paint it, powder coat it, etc. [/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Shot penning [/FONT]
    [FONT=&quot]This process consists of small round metallic particles with sufficient force to create surface deformation.[/FONT]
    [FONT=&quot]The result is an increased stress layer that hardens the outer area of the material making it stronger and more durable while leaving a grainy "sand-like" texture at the surface. Shot penning will come standard with any anodizing color.[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Anodize[/FONT]
    [FONT=&quot]Anodize is a process where color is added to the aluminum at a microscopic level using chemicals and electric current. [/FONT]
    [FONT=&quot]The thickness of the anodize layer averages only a few microns of an inch, virtually noting.[/FONT]
    [FONT=&quot]For best results, shot penning will be standard on any anodized emblem. [/FONT]
    [FONT=&quot]Unfortunately due to weather conditions such as sun light, heat, moisture and salty conditions the anodize can fade over time. [/FONT]

    [FONT=&quot]Cherry red anodize with shot penning[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Gun Metal Black anodize with shot penning[/FONT]
    [FONT=&quot][​IMG][/FONT]


    [FONT=&quot]Speedway Blue anodize with shot penning[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Horns on Fire anodize with shot penning[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [​IMG]

    [FONT=&quot]Single color powder coat[/FONT]
    [FONT=&quot]Powder coat is simply paint in the form of powder.[/FONT]
    [FONT=&quot]Once each emblem has been sprayed with the color powder it is "baked" in an oven at 370 degrees Fahrenheit.[/FONT]
    [FONT=&quot]The result of this process is a hard form of paint much more durable than ordinary paint and about .012 thick on average.[/FONT]

    [FONT=&quot]Shot penning with clear powder coat[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Black Powder Coat (Non-shiny, mat finish)[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Red Powder Coat[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Nautical Blue powder coat [/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]White Powder Coat[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]White Vein powder coat[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Silver vein powder coat[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polishing[/FONT]
    [FONT=&quot]Polished option removes the CNC marks and uses a polishing wheel to smooth the surface to a mirror-finish. After the emblem has been polished a layer of clear powder coat will be applied to preserve the shine. This is the closest to an original factory emblem finish.[/FONT]

    [FONT=&quot]Polished with clear powder coat (as best as it can get for that “factory installed” appearance)[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polished and black anodize[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polished and Cherry red anodize[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polished and Speedway blue anodize[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polished Horns on Fire anodize [/FONT]
    [FONT=&quot][​IMG][/FONT]

    [/FONT]
    [FONT=&quot]Devil Horns: [/FONT]
    [FONT=&quot]1995-2000 Tacoma (emblem width: 4.29 inches) [/FONT]
    [FONT=&quot]2001-2004 Tacoma (emblem width: 4.45 inches) [/FONT]
    [FONT=&quot]2005-2010 Tacoma (emblem width: 5.50 inches)[/FONT]
    [FONT=&quot]2011+ Tacoma (emblem width: 6.30 inches) [/FONT]

    [FONT=&quot]1999-2002 Tundra (emblem width: 5.08 inches) [/FONT]
    [FONT=&quot]2002-2006 Tundra (emblem width: 6.30 inches) [/FONT]
    [FONT=&quot]2007+ Tundra (emblem width: 6.69 inches) [/FONT]

    [FONT=&quot]1998-2001 4Runner (emblem width: 4.05 inches, drilling on grille may be required)[/FONT]
    [FONT=&quot]2002-2004 4Runner (emblem width: 4.72 inches) [/FONT]
    [FONT=&quot]2005-2009 4Runner (emblem width: 5.50 inches) [/FONT]
    [FONT=&quot]2010+ 4Runner (emblem width: 5.91 inches) [/FONT]

    [FONT=&quot]2003-2006 Rav4 (emblem width: 5.13 inches)[/FONT]
    [FONT=&quot]2006-2008 Rav4 (emblem width: 5.92 inches) [/FONT]
    [FONT=&quot]2008-2011 Rav4 (emblem width: 6.30 inches) [/FONT]

    [FONT=&quot]1992-1995 Pickup (emblem width: 4.02 inches)[/FONT]
    [FONT=&quot]2003-2008 Corolla (emblem width: 4.31 inches) [/FONT]

    [FONT=&quot]Options: [/FONT]
    [FONT=&quot]Natural aluminum [/FONT]
    [FONT=&quot]1 color anodize and shot penning [/FONT]
    [FONT=&quot]3 Color anodize (horns on fire), and shot penning[/FONT]
    [FONT=&quot]1 Color powder coat[/FONT]
    [FONT=&quot]Shot penning with layer of clear powder coat[/FONT]
    [FONT=&quot]Polished with one color anodize[/FONT]
    [FONT=&quot]Polished with three colors anodize[/FONT]
    [FONT=&quot]Polished with clear powder coat[/FONT]

    [FONT=&quot]Custom colors / options[/FONT]
    [FONT=&quot]I have tried my best to have more colors and options available for everyone, unfortunately every time a new color or option is added I have to pay a minimum charge to the vendors that provide this service. If you don’t see a color offered here it means it’s not available. [/FONT]

    [FONT=&quot]Payment:[/FONT]
    [FONT=&quot]Preferred method for payment is by PayPal[/FONT]
    [FONT=&quot]You may use PayPal’s service to send your payment using your own debit/credit card or personal check.[/FONT]
    [FONT=&quot]Personal check, cashier's check or money order can be mailed[/FONT]

    [FONT=&quot]Other emblems.[/FONT]
    [FONT=&quot]Mid bracket will support all other emblems that I will be producing over time. Many logos, styles and fully custom emblems will be available soon![/FONT]

    [FONT=&quot]Installation requirements:[/FONT]
    [FONT=&quot]*5/32" Allen wrench[/FONT]
    [FONT=&quot]*5 minutes of your time (in most cases)[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Installation Info:[/FONT]
    [FONT=&quot]There's very little skills required for the installation of Devil Horns. I have made it as easy as I could for anyone to install this emblem using 10-32 screws and washers with minimal time. This would be the typical installation scenario: [/FONT]
    [FONT=&quot]*Open the hood of your vehicle.[/FONT]
    [FONT=&quot]*With your fingers, gently remove the emblem by pressing the tabs closer to each other (older models may require removing screws).[/FONT]
    [FONT=&quot]*Locate Devil Horns / Mid Bracket onto factory or after market grill and finger-tighten provided screws and washers to the emblem.[/FONT]
    [FONT=&quot](If using Model T emblem, install emblem onto Mid Bracket first)[/FONT]
    [FONT=&quot]*Snugly tighten all screws with a 5/32" Allen wrench also know as hex key.[/FONT]
    [FONT=&quot]*Take your truck for a ride to display your newly installed emblem. = ][/FONT]

    [FONT=&quot]It brings me joy reading about every one of you and receiving pictures of your cars/trucks. I will try my best to keep these emblems available, but I fear someday I will have stop making them. For the time being, I'm having my kicks making them for Toyota vehicles and I hope to keep making them for some time. It is my pleasure to bring you a unique item not sold or made anywhere else. [/FONT]

    [FONT=&quot]Sincerely, [/FONT]

    [FONT=&quot]Andres Diaz[/FONT]
    [FONT=&quot]Fabricating Devil Horns since 2008[/FONT]

    [FONT=&quot]Rules:[/FONT]
    [FONT=&quot]1) PRODUCT OFFERED TWICE A YEAR ONLY[/FONT]
    [FONT=&quot]Devil Horns is fabricated twice a year usually in the months of April and October due to an agreement with Toyota’s legal department. [/FONT]
    [FONT=&quot]No Devil Horns will be sold outside of these two time frames per year.[/FONT]

    [FONT=&quot]2) LIST[/FONT]
    [FONT=&quot]All year long I update a list of people interested in purchasing Devil Horns and notify them once the current batch is open. If you are interested in Devil Horns please send me a PM or email and I will gladly put you in that list. [/FONT]

    [FONT=&quot]3) BE CAREFUL WHERE YOU SELL DEVIL HORNS!!![/FONT]
    [FONT=&quot]Copyright infringement is a serious offense and eBay is notorious for tracking illegal and unlawful content, copyright infringements, etc. Please don't sell this emblem on eBay; I may never get another change in making them again. If you have an emblem for sale I can help you find a buyer or you can safely post what you have for sale at the following site, a price and brief description is sufficient: [/FONT]
    [FONT=&quot]http://www.tacomaworld.com/forum/buy-sell-trade/236979-items-sale-made-andres.html[/FONT]
     
    Last edited: Oct 20, 2013
  2. Oct 1, 2013 at 6:13 PM
    #2
    neontrail

    neontrail ✈ ✈ ✈ ✈ ✈ ✈ ✈

    Joined:
    Apr 9, 2008
    Member:
    #5844
    Messages:
    10,155
    Gender:
    Male
    Idaho
    Vehicle:
    2004 NISSAN XTERRA XE/SE
    De-badged, Tint 20%, Blue 48 LED dome-light, .......
    yes!!!!!!!!!!!! thank you Andres!!!!
     
  3. Oct 1, 2013 at 6:40 PM
    #3
    Andres

    Andres [OP] Well-Known Member Vendor

    Joined:
    Sep 27, 2008
    Member:
    #9514
    Messages:
    1,000
    Gender:
    Male
    First Name:
    Andres
    Hawthorne, CA
    Vehicle:
    Toyota Tacoma TRD off-road
    You're welcome bro!
    :thumbsup:
     
  4. Oct 1, 2013 at 6:56 PM
    #4
    Grumpy514

    Grumpy514 Well-Known Member

    Joined:
    Sep 5, 2013
    Member:
    #111920
    Messages:
    65
    Gender:
    Male
    First Name:
    Emil
    NOVA
    Vehicle:
    13' Magnetic Gray
    Oh no, all the pictures are gone!!!
     
  5. Oct 1, 2013 at 8:39 PM
    #5
    TuFerLife

    TuFerLife 2 4 LIFE!!!

    Joined:
    Apr 24, 2012
    Member:
    #77564
    Messages:
    2,590
    Gender:
    Male
    First Name:
    Taylor
    Chattanooga, TN
    Vehicle:
    '06 Boosted Lifted 4X4 DCSB
    URD MKII Stage 2 supercharger, APR X-1 ECU, DTLT L1 series, Pro Comp 6" lift (stage 1), 20" KMC XD Monsters wrapped in 35x12.50 Pro Comp Extreme AT's, Icon DR coilovers, Icon DR Billet UCA's, Custom Dual exhaust - Magnaflow X muffler to 2 Bassani mufflers with tuned pipes to eliminate drone at 2-3000 RPM, Redline hood struts, Spider Trax front wheel spacers 1.25", Line-X'd 2" nFab nerf bars and Avid Light Bar, Illumination Supply 30" double row spot/flood combo LED light bar, Bushwhacker pocket style flares, 13tw5 in Mr. Marv box and memphis door speakers, URD Short Shifter, TRD Shift Knob Carbon Fiber hood Skewp, AsianAnts FXR projectors
    Sub'd for pricing
     
  6. Oct 1, 2013 at 8:46 PM
    #6
    ZKuhl

    ZKuhl Tin Ninja

    Joined:
    Mar 18, 2013
    Member:
    #100016
    Messages:
    244
    Gender:
    Male
    First Name:
    zane
    MT
    Vehicle:
    2013 tacoma trd sport
    3 in revtek, aal, 285/70/17 hercules m/s on 17x9 eagle alloy, stampede deflector, auto vent visors, delta black diamond plate tool box pelfreybilt front bumper......?????
    sub'd i dont see pics either
     
  7. Oct 1, 2013 at 8:52 PM
    #7
    xaqori

    xaqori I need gas money

    Joined:
    Jun 10, 2012
    Member:
    #80410
    Messages:
    1,770
    Gender:
    Male
    First Name:
    Zac
    Marietta, Georgia
    Vehicle:
    '06 4x4 Limo
    ARB lockers and 4.88s front and rear, OME 886s, Dakars, etc., Safari Snorkel, 17"Fuel Revolvers w/ 35x12.50r17 KM2s, fenders cut 3" all around, Pioneer AVH-P4400BH w/ Backup cam, CB/PA (PA Installed), Weathertech Digis, Foglight anytime, AP: front bumper, skids, and pack rack, custom sliders, Warn 9.5XP, dual VIAIR 480Cs with a 2.5gal tank, OTRATTW switches galore, URD y-pipe, RCI skids, LF 240s, etc.
    I don't see prices either... am I derping out over here?
     
  8. Oct 2, 2013 at 12:08 AM
    #8
    FATaco

    FATaco Well-Known Member

    Joined:
    Dec 6, 2010
    Member:
    #47239
    Messages:
    215
    Gender:
    Male
    First Name:
    Friends call me Ginger
    Augusta, GA
    Vehicle:
    07' TRD That one-------------------->
    Dakars w/AAL, OME/886's, All Pro Front Bumper, Rear bumper, IFS skid, and UCA's. Superwinch Tigershark. Magnaflow muffler... vrooom
    Pm'd for prices and order info.:pout:
     
    Last edited: Oct 2, 2013
  9. Oct 2, 2013 at 12:40 AM
    #9
    Naveronski

    Naveronski Well-Known Member

    Joined:
    Sep 14, 2013
    Member:
    #112501
    Messages:
    293
    Gender:
    Male
    Dallas/Africa
    Vehicle:
    TRD Off Road
    I want one. Waiting for pics and prices.
     
  10. Oct 2, 2013 at 12:46 AM
    #10
    bigshug1

    bigshug1 Well-Known Member

    Joined:
    Mar 14, 2013
    Member:
    #99688
    Messages:
    134
    Gender:
    Male
    Concord, VA
    Vehicle:
    '13 DC Off-Road 4x4
    Sub'd for pricing and PayPal address...
     
  11. Oct 2, 2013 at 6:42 AM
    #11
    drek

    drek Well-Known Member

    Joined:
    Jul 10, 2013
    Member:
    #108002
    Messages:
    60
    Gender:
    Male
    Alberta, Canada
    Vehicle:
    2013 Tacoma TRD Sport Supercharged
    Please send me price list. I would like one!
     
  12. Oct 2, 2013 at 9:12 AM
    #12
    cabo wabo

    cabo wabo Well-Known Member

    Joined:
    Jul 25, 2012
    Member:
    #83370
    Messages:
    437
    Gender:
    Male
    First Name:
    billy
    virginia
    Vehicle:
    2015 dbc long bed trd sport
    Please send price list. I would like the model T !!!!!
     
    Last edited: Oct 2, 2013
  13. Oct 2, 2013 at 7:55 PM
    #13
    tacodane

    tacodane The Slow But Getting Somewhere Build

    Joined:
    May 25, 2013
    Member:
    #104898
    Messages:
    4,320
    Gender:
    Male
    First Name:
    Dane
    Vehicle:
    2013 Tacoma Prerunner SR5
    Led Interior Lights AFE CAI Stage II, Aero Turbine 2525 Muffler Snugtop Cab-Hi shell TRS Retrofitted Headlights
    x2 deff want one!!! model t with no finish
     
  14. Oct 2, 2013 at 8:03 PM
    #14
    TSmalls89

    TSmalls89 Technologically Advanced Redneck

    Joined:
    Mar 27, 2013
    Member:
    #100700
    Messages:
    480
    Gender:
    Male
    First Name:
    Tyler
    Bedford, NH
    Vehicle:
    2013 Tacoma 4x4 SR5 Boston Edition
    Rain Guards 32inch, 20 inch LED Light Bar 285/75/r16 General Grabber AT2 on MB Razer Rims Full Custom Sound System PA System Flowmaster Dual Exhaust
    Definitely want a model T. What's pricing??
     
  15. Oct 2, 2013 at 10:51 PM
    #15
    Andres

    Andres [OP] Well-Known Member Vendor

    Joined:
    Sep 27, 2008
    Member:
    #9514
    Messages:
    1,000
    Gender:
    Male
    First Name:
    Andres
    Hawthorne, CA
    Vehicle:
    Toyota Tacoma TRD off-road
    I cannot show prices in forum sites so I email them.
    Please contact me and provide me with your email address so I can send you a price list.

    = ]
     
  16. Oct 3, 2013 at 9:40 AM
    #16
    tacodane

    tacodane The Slow But Getting Somewhere Build

    Joined:
    May 25, 2013
    Member:
    #104898
    Messages:
    4,320
    Gender:
    Male
    First Name:
    Dane
    Vehicle:
    2013 Tacoma Prerunner SR5
    Led Interior Lights AFE CAI Stage II, Aero Turbine 2525 Muffler Snugtop Cab-Hi shell TRS Retrofitted Headlights
    :yay:
     
  17. Oct 3, 2013 at 10:01 AM
    #17
    geekhouse23

    geekhouse23 DCSBORFTMFW

    Joined:
    Jul 14, 2013
    Member:
    #108251
    Messages:
    3,812
    Gender:
    Male
    Vehicle:
    3rd gen MGM DCSB 4x4
    mostly stock, grocery gettin' Prius
    sub'd :D

    PM sent!!
     
    Last edited: Oct 3, 2013
  18. Oct 3, 2013 at 3:19 PM
    #18
    Tacomapratt

    Tacomapratt Well-Known Member

    Joined:
    Aug 4, 2013
    Member:
    #109781
    Messages:
    69
    Gender:
    Male
    Huntington W.V.
    Vehicle:
    Super White DCLB 4.0 4x4
    Anytime fog lights, tinted windows 20%, 3"leveling kit, 6000k headlight & foglights, TRD shifter, in channel vent visors, weather tech floor mats, removed mud flaps.
    PM sent/ email
     
    Last edited: Oct 3, 2013
  19. Oct 3, 2013 at 8:33 PM
    #19
    FATaco

    FATaco Well-Known Member

    Joined:
    Dec 6, 2010
    Member:
    #47239
    Messages:
    215
    Gender:
    Male
    First Name:
    Friends call me Ginger
    Augusta, GA
    Vehicle:
    07' TRD That one-------------------->
    Dakars w/AAL, OME/886's, All Pro Front Bumper, Rear bumper, IFS skid, and UCA's. Superwinch Tigershark. Magnaflow muffler... vrooom
    Have you started sending out prices yet? I emailed a few days ago but never received anything. Thanks!
     
  20. Oct 3, 2013 at 8:40 PM
    #20
    tacodane

    tacodane The Slow But Getting Somewhere Build

    Joined:
    May 25, 2013
    Member:
    #104898
    Messages:
    4,320
    Gender:
    Male
    First Name:
    Dane
    Vehicle:
    2013 Tacoma Prerunner SR5
    Led Interior Lights AFE CAI Stage II, Aero Turbine 2525 Muffler Snugtop Cab-Hi shell TRS Retrofitted Headlights
    x2
     
To Top