Old Man Emu: Questions, Answers & Pictures

Hmm when goes over speed bump clank. The fact that he has 5100s might disprove the over extended shock theory if it isn't the sway bar or other issues

 

You guys getting the clank, have you checked to make sure your LCA bolts are torqued? Even if they're tight, but not tightened to spec, it can cause a clunk when you hit a bump.

 

So got another question for you gents. Those of you who have the Dakar OME leaf packs, have you removed any leaves from it? If so, is it just the overload you remove? And what kind of lift is that giving you?

 

I removed the 3rd leaf from the top. My rear is a half inch higher than the front with 885s and no top plate spacer. You can also remove the upper overload but that will only reduce the lift by the thickness of the overload leaf (5/8"?)

 

Removing the third leaf down is a similar height reduction , 5/8"

 

Are all you " over speed bump goes clank " guys still running stock bumpstops ?

 

Where you going with that one, you think the shock is bottoming out??

 

Now remember guys, most people having the clunk noise is when your wheels go down the bump not when you initially hit the supported bump.

 

Mine ended up reducing the lift a little more based on the averages on your thread. Im at about 23.5 in the rear

 

Just trying to find a commonality in the set ups that this issue is related to

So far the only thing that everyone seems to share is OME coils

Seeing how the OME shocks and 5100 shocks have different coil seats , and people are getting this noise with stock UCA's as well as aftermarket UCA's , the only common denominator seems to be the coil , and I'm not sure how a coil is going to be responsible for this noise

 

I'd be willing to bet it's coil orientation and something is contacting the coil or somethings not tightened down like the LCA bolts.

 

I removed the 3rd leaf and I am at 23 3/8 so almost 23.5. The ride is amazing and with the 885s up front with the 1/4" top spacer I am only a 1/16 of an inch difference from front to rear

 

Where can I find instructions how to install the Dakar leafs and

$82 D29XL Leaf Spring

D29XL?

 

http://www.tacomaworld.com/forum/showpost.php?p=2224677

 

I was hopping for some official pdf files , but this should do it. Thank you!

 

OME 886's, Dakars with one overload removed, OME shocks all 4 corners. No idea what I got out of the lift, but I'm at 23 1/2" up front and 24" in the rear. No armor other than the ARB, still have the sway bar, but it's about to come off due to spring contact issues. 255/85 km2s no rubbing, no trimming.

 

​

Bite it!​

 

Official pdf files from ARB / OME ?

You could email them

http://arbusa.com/Contact.aspx

 

Sharp lookin truck

 

Looks good Mike,
Swing by our local threads & say hi.
Reno and surrounding areas: Official spotted, BS, and meets thread(1 2 3 ... Last Page)
775 Tacomas(1 2 3 ... Last Page)