Suspension Noise (with video)

I have been having some suspension noise on my drivers side. I finally strapped a go-pro in and video'd the noise. Noise starts mostly around 3:00. Icon extended travel coilover, icon tubular uca. It can be heard mainly when loading the drivers side

any and all help would be appreciated


https://youtu.be/VABzolJcG0g

*Update post #35*

 

Dude... Pretty sure I have the same problem. Is it like a ticking noise going over subtle bumps and stuff? I have looked everywhere to find mine.. I am thinking it may be LCA related.. It almost sounds like a cracked weld on my truck.

 

Yes there is a ticking noted

 

Have you found a remedy for it yet? Its driving me crazy and I cant find where its coming from after hours of looking.. I have a feeling its LCA related though. Either that, or something is loose in the engine bay and its being a PITA to find.

 

not yet. planning to go through all moving parts in the front end tomorrow and torquing everything

 

Awesome. Looking forward to hearing how it goes.

 

Check the Allen bolt on the sway bar end links. Probably loose.

 

After watching video, im even more certain the bolts need to get tightened. Literally just did this to mine. Chased the issue for 2 weeks. It was the passangers side end link on mine

 

Good call. Forgot when I torqued mine that there is an allen key in that bolt. That being said though, my noise started haoppening before I installed my lift. And believe me, that nut was snugged down good when I tried to take it off. Not sure where mine is coming from still.

 

Double check it. I didnt take my sway bar off or even touch it to do my shocks and sure as shit 8 months later it worked its way loose. Crabked that effer down and my annoying click went away.

 

Shiet. Ill give her a go this weekend. Thanks man

 

Yea make sure the end link is sitting flush and tight! It can make that tinking sound if its not flush and bolt moves a little

 

Went through everything on Sunday. Retourqed everything. Pulled CV and check ECGs bushing. Everything was good everything is at spec and tight. Butttt the noise is there, and louder. Not sure what the hell it could be

 

i had seen your post awhile back (https://www.tacomaworld.com/threads/icon-coilover-issue.470228/page-2) and was hoping you might update that one.

Have you changed out the lower shock mount bearing (http://performancelifts.com/icon-com-10-replacement-bearing-255110.html) that was suggested in the previous post?

I have a similar noise in my front end when going over subtle rumples, bumps etc at a neighborhood speed (Icon Extended travel coil overs up front as well). I just live with it after going over all things to make tight several times the past couple years. I don't think it has to do with sway bar, haven't run that in ages either. I've got about 60K miles on my icons now fwiw, other than this rumple bump noise and little bit squeaky rear shocks when dirty, all is good.

 

I have not done that yet. Completely forgot about it. Thank you for the info thou I will look into it further.

 

Check the torque on the alignment cam nuts.
Had a noise similar to this and that was the issue.
Thanks to @GHOST SHIP for that excellent diagnosis.

 

Good tip - (https://www.tacomaworld.com/threads/the-torque-spec-guide.318116/) looks like it's 100 Ft lbs for 4wd, 155 ftlbs 2wd.

 

I checked them too. Torqued to 100ft lb.

 

This is good. Wonder if it is stickied?

edit: yup. It is.

 

damn.....