Where can I get this

I'm new to this tacom world. Saw this grille on a post and wanted to know WHERE CAN I GET IT. Also I'm using my ipad and hope it shows

 

Homertaco... Look in vendor section

 

Oh, and welcome to TW

 

http://www.tacomaworld.com/forum/homertaco/

 

Welcome. He does awesome work

 

^^^This. Or you can make your own.


http://www.tacomaworld.com/forum/2nd-gen-tacomas/28831-my-satoshi-grill-write-up.html

 

Hey, I am on my phone so I'll try and get the links for that, but its called a "satoshi" raptor grille and the "Toyota" letters are made by Jerry at BAMF. He also offer those letters to read "Tacoma"

 

FYI the Raptor lights in the grille do not come with the grille. They're a custom add on by crafty members

 

Raptor mesh: http://www.tacomaworld.com/forum/homertaco/301053-raptor-style-mesh.html
Raptor letters:
http://www.tacomaworld.com/forum/bay-area-metal-fabrication/301339-raptor-grille-letters.html
Satoshi 101:
http://www.tacomaworld.com/forum/homertaco/186781-homertacos-satoshi-101-a.html

And you may like these:
http://www.tacomaworld.com/forum/lighting/293647-diy-raptor-style-lights.html

 

I'm for sure going to do this mod it looks so sweet!!

 

The HomerTaco Raptor grill is by far the best looking grill on any truck ever in my own opinion. That being said...last I checked he had over a hundred people waiting in line for a grill. There is a high demand and he's a one-man operation. He's not just pumping out this grill, but prototypes of others. You can get one, just gotta get in line.

Welcome to the forums, too. I made my satoshi with the same pattern mesh and love it. If you're handy you can do the Raptor one. Good luck.

 

I went the route of building my own, being that the Homertaco ones run about a whopping 300$. Not to mention gaining the satisfaction of doing it yourself. Although it was somewhat time consuming, it was a fairly easy (and cheap) job. Fiberglass and bondo ran about 23 bucks together, 2 cans of paint 10$, and the 27"x96" wire mesh I got from Lowes was $8.99. Here's a good write up of the steps.
http://www.tacomaworld.com/forum/2nd-gen-tacomas/28831-my-satoshi-grill-write-up.html