Easiest Fog Anytime mod?

Okay so I wanna do the foglights anytime mod, but I don't wanna splice into any wires or anything really since its a new truck...I did see a few weeks back a guy post in a thread about an easier way to do it, I don't think it required in splicing or anything hard at all...and I believe it made it so you could use fogs w/ parking lights, and then both headlight beams.

I can't find it, so could someone post a link or a step by step on how to do fogs anytime mod the easiest way?

I want the easiest way to do fogs anytime, I don't wanna mess any wires up..

Thanks in advance

 

easiest way is to add a wire between your fog relay and splice it into your green power wire in you fuse box. i don't think you can do the mode without splicing into something.

 

http://www.tacomaworld.com/forum/technical-chat/4838-cheap-free-mods.html#post45430

http://www.tacomaworld.com/forum/2nd-gen-tacomas/77561-fog-light-mod-pics-included.html

 

^^^ what he said. Just do it. It literally takes 10 minutes and looks seamless.

Go to Radio Shak and get an assorted wire crimp/splice kit that includes snap wire splicers like this:




And female crimp-on wire connectors like this:



And a 6" long piece of 16awg wire will do the trick.

Then if for some reason you want to un-do it, you can remove the snap splice and wrap a piece of electrical tape around the green wire that will have only a 1/64" long piece of bare wire that needs to be covered.

 

^ that's it!

No splicing...just tapping into a wire. It's very easy with those blue quick connects. And the spade connector just crimps onto the little tab. Follow the directions in that link. It is very easy.

 

Since im at newb at the splicing and wire stuff, can anyone upload a pic so i know what it should look like and which relay/wire is the right one??

 

There is no doubt this is the easiest way to do it.

http://www.tacomaworld.com/forum/lighting/132862-fog-lights-w-parking-low-beam-high-beam.html