Nazlax10's build

Most current picture



This being my first Tacoma I may have went a little mod crazy. I know it's a problem, I'm just choosing to ignore it. If you have any questions about my mods please comment or message me. So please enjoy my build thread and keep the great ideas flowing!

List of associated write-up's and products. (Some write-ups are not mine, but just the information I found and followed)

• Bed light switch

• Locking bed boxes

• Handgun Holster

• Remote starter products and install vidoes

Remote starter

Remote Starter Install Video 1

Remote Starter Install Video 2

Remote Starter Install Video 3

• Hazard switch/clock install

• Shift knob

• Grid-it organizer

• Tailgate washer mod

• Map light/Dome light mod

• Glove box light

• Tailgate assist

• TRD Center Caps- Toyota P/N PT904-35070-CC

• Overhead Digital Console and this too for wiring.

• Hilux 4x4 Switch parts and write ups

Hilux switch

Terminal connectors- P/N 82998-12420.

Then follow this thread step 11 to the end for wiring.
If you want to do the hilux switch let me know and I can get you the spacer ring you'll need.

• Glow in the dark ignition ring

• Dash cam products

Dash cam

GPS antenna

Some extras to clean up the installation..

Mini USB right angle adapters

3.5mm right angle adapter

Hardwire kit

• Redline tuning hood struts

• Black interior panels

• Screen mirroring to factory radio

• First aid kit

• Bottle pro cup adapter

• Pop n lock power tailgate lock

• A-pillar phone mount products and write up

A-pillar phone cradle

A-pillar phone mount

Right angle USB cable

A-pillar phone mount write up

• Door sill protectors- Get two and cut them in half.

• Undercoating- I only used one quart for the entire underbody.

• Engine block heater parts

Engine block heater

120v body mount adapter

• Heated seats parts and write up

Heated seat kit

Heated seat write up I followed

• Salex glove box organizer

• Sabellco tailgate lock

• One touch window parts and write up

One touch window module

Once touch window write up (the wiring varies if your window is already one touch down. Check the end of the thread)

• 4runner mirror mod for heated mirrors and puddle lights products and write up

Drivers 4runner mirror
Passengers 4runner mirror
Drivers heated glass
Passengers heated glass
LED bulbs
Mirror switch
Wiring harness from Up2NoGood
4runner mirror mod write up

• Wileydavis'knobs

• Sly No Drill License Plate Brackets

• Impeller fan filter write up and parts

Filter
Impeller fan filter write up

• ECGS bushing replacement

Bushing
Removal tool
Replacement tool
Good information

• Katzkin covers products and write up

Katzkin covers
Write up

• AC knob swap

More info with link to knobs

• G-tek fab door sill protectors

• Total Chaos bed stiffeners with Amp research bed extender

Write up with parts info

• TRD Pro grille

• Door hardware trim

• Topper electric lock

• Fire extinguisher mount

• Blackvue dash cam battery

• Screen protector

• Raptor lights

• Retrofit headlights

Painted using this

• Square LHD Mini D2S Projectors
• Square Gatling Gun 2.0 Shrouds
• 50W D2S Ballast
• 6500K Bulbs
• 9003 Wire Harness

• Morimoto XB LED Foglights

• Lighted ignition ring

Ignition ring (I got mine from a junkyard, along with the two terminal pins needed)
Write up

• CBoy808 anti glare decal

• Oil catch can

Catch can
Write up
How I did my mount

• Lift

Front struts- OME 90000s
Rear struts- OME 60091s
Coils- OME 886s
Light Racing UCAs
1/4" TPS

• Lighted mirror control switch (Info with part at the bottom)

• Current tires

• Fumoto oil drain valve

Also here is my screen saver


And my startup image

 

This is my 2015 Tacoma DCSB TRD Sport. I bought it brand new April 26, 2015.

 

I look forward to seeing what you've done

 

The first mods I completed were bed rail lights and a rear window security bar courtesy of @mattgecko.





I also installed LED interior lights and rain-x latitude wiper blades.

 

HID headlights and foglights were next, and plasti dipped badges along with two TRD emblems I bought off of ebay.

 

Then a mod a parking lot stranger forced me to do when they stole straps out of my bed boxes, thanks friend! I installed cubby door locks with mathching key for all of them.

 

For a little comfort of body and peace of mind I added a gun holster below my steering wheel. The holster was about $12 from walmart and some paracord I had.
Also a center console light with mercury tilt switch.
I also chopped my antenna for aesthetics.

 

Then added a tri-ball hitch with some free advertising and a remote starter(my most useful mod so far)

 

Next was a need for a clock since I keep my radio screen saver on since I like the picture so much so I added a clock hazard switch from a 2005 Tacoma (I kept my black button though) and a phone mount with built in charger from proclip.com. Also a new shift knob.

 

I just realized I should explain why I don't have a USB port. I did the add an aux port from best buy and mounted that in a switch blank plate and put my usb port behind the dash with a 4 port hub. This was so I can have a dedicated phone charger and I ran a usb extension to the glovebox where I use a flash drive for my music. I really don't like the look of wires everywhere so I hide all of mine to the fullest extent possible.

 

Looks clean man, nice job.

 

Then for more organization, as if I didn't have enough I did the grid it center console mod, made my own glove box organizer, and finally found a center console net.

 

Thanks a lot, I really appreciate it!

 

Also added some 'MERICA today!

 

That shifter is really nice , how much ???? And can you pm me a link

 

Thanks a lot! I paid $65 but can't guarantee prices since I'm just a buyer. I bought mine from FJoel at fjcruiserforums.com. The link is. http://www.fjcruiserforums.com/#/forumsite/20496/userprofile/4197

 

Replaced my plasti dipped badges with black sand pearl emblems. Not a major difference but no edge peeling or corner paint chips. I think they look great and really simple to do!

 

Very good.

 

Thanks a lot, I appreciate the interest and response!

 

I wanted some security for my tail gate so I did the washer mod. (I forgot to take pictures so I borrowed some from the mod I followed lol). Just remember, you can never stop a thief but you can slow them down.