Transmission The new 6 speed AC60 Series automatic in the 2016 " WRITE UP WITH PICS

_AC60 AC60F AWR6B45
__________________________________________________________________

WHEN PERFORMING A TRANSMISSION LEVEL CHECK , YOUR ENGINE MUST BE RUNNING . Too many members are missing this very important part of the procedure

https://www.wheels.ca/top-ten/seven-shifty-transmissions-to-avoid/#:~:text=When Toyota redesigned,to other automakers.

Read what gears magazine has to say about your transmission .
https://gearsmagazine.com/magazine/introducing-the-toyota-ac60e/

Read how gears magazine checks your transmission fluid
https://gearsmagazine.com/magazine/servicing-the-cooling-system-in-the-ac60e/

Nomad valve body for supercharged and heavy towing applications
https://automatictransmission.com.au/shop/nomad-heavy-duty-valve-body-to-suit-toyota-hilux-6-speed/


Valve bodies are available but make sure you are buying the correct one for your application .
https://www.shenghaiautoparts.com/shop/valve-body/ac60-valve-body/

Downshifting complaint much the same as the A750E
If you guys are having downshifting concerns you have to remember that your injectors shut off when you remove your foot from the gas pedal . Toyota did this to save fuel . Combine this with your torque converter remaining locked up can really be fealt in the drivers seat .
If you are fealing a slight clunk while at a stop where you have to apply more break pedal , get use to it .
Here are more downshifting concerns from fellow members https://www.tacomaworld.com/threads/3rd-gen-automatic-shiftin.396877/#post-10989186

2016 Tacoma 6th Gear at 30mph ???????
https://www.tacomaworld.com/threads/2016-tacoma-6th-gear-at-30mph.402179/

Shifting issues with thew new 2016 , Watch this U tube video
https://www.youtube.com/watch?v=gv5t92hfZnw

Check your universal joints . When you purchased your truck , Toyota forgot to grease them . Look here for instructions https://www.tacomaworld.com/threads/check-your-u-joints.409042/page-36#post-12267209


CHECK YOUR OWN FLUID LEVEL .... WRITE UP WITH PICTURES
https://www.tacomaworld.com/threads/3rd-gen-automatic-transmission-fluid-level-check-diy.547455/

I have the factory repair manual for your 2016/17 truck . Send me a pm and I will send you the file . You must be an active and contributing member at Tacoma World . If your post count is zero , I will not send the file

TECHNICAL SERVICE BULLETINS
https://www.tacomaworld.com/threads/t-sb-0077-16-rev-1.457782/page-61#post-14232103

Transmission makes noise on hills ?
https://www.tacomaworld.com/threads...ops-then-grinds-as-it-drifts-rearward.532217/

Are you interested to find out whats been done to your truck while it was on warranty or another owner ?
Type in your VIN # and see what,s been done to your truck at the dealership
http://www.toyota.com/owners/web/pages/home

Before you go to far , take a couple minutes out of your time and read this
Here is a good explanation on how your transmission works . Take a couple minutes out and read it http://www.sonnax.com/tech_resource...in-the-pump-pr-converter-cooler-lube-circuits


Got a clunk you cant figure out ? chances are you are feeling AXLE WRAP .
Axle Wrap has been a burden to Tacomas for many years .
Read here to figure out if you have it
Axle wrap and clunking solved http://www.tacomaworld.com/forum/2n...-lurch-stopping-started-axle-wrap-solved.html
____________________________________________________________
LOW ON TRANSMISSION FLUID ?
Delay to drive like a low fluid condition / reports are coming in . get your fluid checked https://www.tacomaworld.com/threads/low-idle-and-transmission-issue.39755
You heard on the internet that there may be a low level concern ?
Look here https://www.tacomaworld.com/threads/just-dropped-her-off-for-trans-issues.414853/
Here https://www.tacomaworld.com/threads/transmission-slipping-when-cold-and-after-reverse.408895/
Here https://www.tacomaworld.com/threads...tic-shifting-and-drivability-problems.401475/
Here https://www.tacomaworld.com/threads...rive-transmission-creep.411337/#post-11612215
Here https://www.tacomaworld.com/threads/3rd-gen-transmission-fluid-level-check.410615/
Here https://www.tacomaworld.com/threads/tell-me-about-the-new-automatic-transmission.397788/
______________________________________________________________

3rd gen owners learning how the transmission works https://www.tacomaworld.com/threads...-automatic-transmission.397788/#post-11238563

Driveline vibration 10 to 15 mph while slowing down
TSB-0171-16 Driveline vibration
https://www.tacomaworld.com/threads/oh-no-tsb-0171-16-driveline-vibration.463992/

Install a transmission cooler on your 16/17 with pics ( Write Up )
https://www.tacomaworld.com/threads/3rd-gen-transmission-cooler-upgrade.482280/#post-14723804

TSB https://static.nhtsa.gov/odi/tsbs/2018/MC-10143952-9999.pdf


Watching transmission temps with torque pro ?
https://www.tacomaworld.com/threads...-pids-for-torque-pro-and-similar-apps.513531/

Transmission Fluid Temperature PIDs for Torque Pro and NOW APPLE!
https://www.tacomaworld.com/threads...ure-pids-for-torque-pro-and-now-apple.513531/

Speed sensors
https://www.alltranz.com.au/shop/drivetrain/automatic-transmission/AC60E/product/19981/
Complete teardown
https://www.youtube.com/watch?v=Qs2P-uENGh0

Changing your transmission fluid ???????????????????
Listen to the guys who do it every day
http://www.atra.com/transmission_service


Howling noise fix https://www.tacomaworld.com/search/1300913/

LISTED BELOW ARE THE UNSOLVED PROBLEMS THAT MAY BE TRANSMISSION RELATED .

Buzzing issues https://www.tacomaworld.com/threads/poll-how-many-of-you-are-having-vibration-issues.400856/page-3

2nd gear to 3rd gear upshift flare when cold
https://www.tacomaworld.com/threads...ot-hunting-or-vibration-related.427172/page-2

High speed vibrations https://www.tacomaworld.com/threads/unusual-vibration-at-higher-speeds.397620/page-2#post-11150675

Vibration at 2000 rpm https://www.tacomaworld.com/threads/vibration-in-gas-pedal-floorbed-and-steering-wheel.394823/

Whining noise inside the cabhttps:// AB60 valve body swap https://www.youtube.com/watch?v=Du5X7LcVX5c

Shift modulation package for the ab60 trans http://www.ukrtrans.biz/files/2011/10/Toyota_AB60_Transmission.pdf

Aftermarket shift solution!

https://www.tacomaworld.com/threads...troller-now-available-for-gen3-tacoma.490113/


SHOULD YOU USE THE PARKING BRAKE WITH AN AUTOMATIC
I use the ebrake every day and I have an automatic transmission. Using the ebrake when parking is recommended in the Toyota manual . Living way up North in the snow as I type this , they use all kinds of salt .Its better to use the ebrake than have it seize up solid and pay $500 bucks to have all the cables replaced when its time to sell the truck.
With this said , using the ebrake keeps the rear brake shoes adjusted properly and saves your front brakes from wearing quickly
You're also being very nice to the parking pawl inside your transmission. Lots of people just jam it into park on an incline and don't ever use the e-brake. Or worse, jam it into park when the vehicle is still rolling. An e-brake cable is a cheap fix compared to a transmission problem.
Look what happens when you dont use the E brake http://www.tacomaworld.com/forum/2nd...ml#post9531711

 

Interesting link there

 

@gearcruncher Are you looking for what model is new transmission ?
In all the documents now new transmission is listed as Its AC60 E/F

 

• PARTS LISTINGS
• HIACE/REGIUSACE
• TRH226K-LRTDK6
• 3501 TRANSAXLE OR TRANSMISSION ASSY & GASKET KIT (ATM)
• parts list

• home
• About us
• How to buy
• Inquiry

Select parts.
car name 711160 HIACE/REGIUSACE (2013/12 - )
model name TRH226K-LRTDK6 (2015/01 - )
ENGINE 1 2TRFE 2700CC 16-VALVE DOHC EFI
BODY V1 STANDARD VAN
GRADE DX DX TYPE
GEAR SHIFT TYPE 6FC ATM, 6-SPEED FLOOR SHIFT
ROOF HRF HIGH-ROOF
NO.OF DOORS 4D 4-DOOR
SIDE WINDOW SG SIDE GLASS
SEATING CAPACITY 02S 2-SEATER
BUILDING CONDITION IV6 CAMPER CHASSIS
DRIVE TRAIN 4WD 4 WHEEL DRIVE

• Image 1

Select image size.

• 

Enter the parts code or parts number
parts code parts no parts name start - end note PRICE/1 QTY(JPY) PRICE/1 QTY(USD)
04351 04351-26210
Add inquiry

GASKET KIT, AUTOMATIC TRANSMISSION OVERHAUL 2015/01 - TRH216,219,226,228,229 CONTACT US CONTACT US
30030 30030-26B90
Add inquiry

TRANSMISSION ASSY, REBUILT 2015/01 - TRH216,219,226,228,229 CONTACT US CONTACT US
35000 35000-26B90
Add inquiry

TRANSMISSION ASSY, AUTOMATIC 2015/01 - TRH216,219,226,228,229
AC60F CONTACT US CONTACT US

Parts http://toyota.7zap.com/en/jp/hiace/711160/trh200v-
rktdk/2/3512/359187a/



http://toyota.7zap.com/en/jp/hiace/711160/trh219w-jdtdk/2/3512/359185/







Part code Title information
90105-06053 BOLT(FOR MANUAL DETENT SPRING)
90105-06255 ** Std Part
90105-05005 BOLT (FOR TRANSFER RELIEF VALVE PLATE)
35303A 11 RING, O (FOR OIL STRAINER)
35210B 11 VALVE, SOLENOID(SL3)
35290C 11 VALVE, SOLENOID(SLT)
35280A 11 VALVE, SOLENOID(SLU)
35290B 11 PIN, STRAIGHT (FOR LINE PRESSURE CONTOROL SOLENOID)
35285 11 PLATE, SOLENOID LOCK
35330 11 STRAINER ASSY, VALVE BODY OIL
35410 11 BODY ASSY, TRANSMISSION VALVE
35210D 11 VALVE, SOLENOID(SL4)
35210A 11 VALVE, SOLENOID(SL1)
35210C 11 VALVE, SOLENOID(SL2)
91511-C0625 ** Std Part
91511-C0635 ** Std Part
90105-06202 BOLT(FOR CYLINDER HEAD COVER)
35240D 11 VALVE, SOLENOID(SL)

 

MODS

ECT ON ALL THE TIME MOD
https://www.tacomaworld.com/threads/ect-mod-on-all-the-time.456373/

ShiftSense Pro - transmission shift controller for Gen3 Tacoma
https://www.tacomaworld.com/threads...-for-gen3-tacoma.490113/page-84#post-15848837

 

One thing I am not a fan of is a pre heater and all you 3rd gens have it .
When you start your truck in the morning , the pre heater bypasses the transmission cooler and circulates the fluid leaving the torque converter and directs that fluid back to the transmission pan .
You rely on 1 tiny valve always functioning properly .
What happens when that 1 tiny valve sticks in the open position and you continue driving your truck ?

 

tundra fill procedure
Title: AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION FLUID: ADJUSTMENT

NOTICE:

This transmission requires Toyota Genuine ATF WS.
After servicing the transmission, you must follow the ATF adjustment procedure.
Maintain the vehicle in a horizontal position while adjusting the fluid level.

1. PRELIMINARY PROCEDURES

(a) w/ Trailer Towing System (w/Transmission oil cooler thermostat):

(1) Using compressed air, etc., blow dust off the thermostat cap to clean it.

(2) Using a screwdriver, push the shaft of the thermostat.

HINT:

Pushed amount: 5.5 to 7.0 mm (0.217 to 0.276 in.)
Push the shaft until the screwdriver contacts the step inside the cap.

(3) With the shaft of the thermostat pressed, push a pin into a hole on the side of the thermostat's cap. Insert the pin until it passes through the hole on the other side of the thermostat's cap to fix the shaft in place.

HINT:

Pin diameter: 1.0 to 1.8 mm (0.0394 to 0.0709 in.)


2. BEFORE FILLING TRANSMISSION

When you have replaced the entire transmission, transmission pan, drain plug, valve body and/or torqueconverter, proceed to the "TRANSMISSION FILL" procedures.
When you have replaced the transmission hose and/or output shaft oil seal, proceed to the "FLUID TEMPERATURE CHECK" procedures.

3. TRANSMISSION FILL

(a) Remove the refill plug and overflow plug.


(b) Fill the transmission through the refill hole until fluid begins to trickle out of the

$5 HONDA 16110-GG2-750 STAY, OVERFLOW TUBE

overflow tube.


(c) Reinstall the overflow plug.

(d) Fill the transmission with the amount of fluid listed in the table below.

Reference Capacity:

Repair


Fill Amount

Transmission pan and drain plug removal


2.1 liters (2.2 US qts, 1.8 Imp. qts)

Transmission valve body removal


4.7 liters (5.0 US qts, 4.1 Imp. qts)

Torque converter removal


6.1 liters (6.4 US qts, 5.4 Imp. qts)

(e) Install the

$23 Dynaplug 1014 Tire Repair Refill Plug - Pack of 5 - Motorcycle, Car, Truck and Other Tubeless Tires

refill plug.

HINT:

If you cannot fill the listed amount of fluid, do the following below:

(1) Start the engine to idle.

NOTICE:

Check that electrical systems such as the air conditioning system, audio system and lighting system are off.

(2) Move the shift lever through the entire gear range to circulate the fluid.

(3) Wait for 30 seconds with the engine idling.

(4) Stop the engine.

(5) Remove the refill plug.

(6) Fill the transmission with the remaining fluid until the amount in the table has been filled.

(7) Install the refill plug.

4. FLUID TEMPERATURE CHECK

NOTICE:

The ATF temperature can be confirmed by using a Techstream.

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch ON.

(d) Enter the following menus: Powertrain / Engine and ECT / Data List / A/T Oil Temperature 1.

(e) Check the ATF temperature.

NOTICE:

If the ATF temperature is above 44°C (111°F), turn the ignition switch off and wait until the fluid temperature drops to between 37 and 44°C (99 and 111°F).

5. FLUID LEVEL CHECK

NOTICE:

It is necessary to change to temperature detection mode in order to idle the vehicle appropriately.
The ATF temperature must be between 37 and 44°C (99 and 111°F) to accurately check the fluid level.

(a) Enter the following menus: Powertrain / Engine and ECT / Active Test / Connect the TC and TE1.

Standard condition:

Indicator lights on the combination meter blink.

HINT:

Also when not using the Techstream. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

SST: 09843-18040

(b) Start the engine to idle.

NOTICE:

Check that electrical systems such as the air conditioning system, audio system and lighting system are off.

(c) Slowly move the shift lever from P to S, then change the gear from 1st to 6th. Then return the shift leverto P.

HINT:

Slowly move the shift lever to circulate the fluid through each part of the transmission.

(d) Move the shift lever to D, and quickly move back and forth between N and D (once within 1.5 seconds) for at least 6 seconds. This will activate the fluid temperature detection mode.

Standard condition:

Indicator light [D] remains illuminated for 2 seconds and then turn off.


(e) Return the shift lever to P and terminate the Active Test on the Techstream.

(f) Using the Techstream, allow the engine to idle until the fluid temperature reaches 37 to 44°C (99 to 111°F).

HINT:

The indicator [D] will come on again when the fluid temperature reaches 37°C (99°F) and will blink if it exceeds 44°C (111°F).
Indicator [D] Indication of ATF Temperature

Below 37°C (99°F)


37 to 44°C (99 to 111°F)


Exceed 44°C (111°F)

Turn off


Turn on


Blinking

(g) Remove the overflow plug with the

$6 Motorcraft Spring

engine idling.


(h) Wait until the overflow slows to a trickle.

NOTICE:

If the fluid does not overflow, do the following below:

(1) Remove the refill plug.

(2) Refill the transmission through the refill hole until fluid begins to trickle out of the overflow tube.

(3) Wait until the overflow slows to a trickle.

(i) Install a new gasket and the overflow plug.

Torque:

20 N·m {204 kgf·cm, 15ft·lbf}

(j) Install a new gasket and the refill plug.

Torque:

39 N·m {400 kgf·cm, 29ft·lbf}

6. COMPLETE

(a) Turn the ignition switch off.

(b) Disconnect the Techstream from the DLC3.

(c) w/ Trailer Towing System (w/ Transmission oil cooler thermostat):

(1) Remove the pin by pushing the shaft with a screwdriver.

NOTICE:

Make sure the shaft of the thermostat is protruding from the hole on the cap.


(d) Inspect for automatic transmission fluid leak.

 

Toyota Hi ace forum
http://toyotaowners.net/toyota-forum/forumdisplay.php?f=29&order=desc

 

saved for write up

 

saved for write up

 

saved for write up

 

saved for write up

 

HOW TO DOWNLOAD THE COMPLETE REPAIR MANUAL FOR YOUR TRUCK DIRECTLY FROM TOYOTA .

How to download repair manual from TIS
https://techinfo.toyota.com/techInf...urce_url=https%3A%2F%2Ftechinfo.toyota.com%2F

The toyota information system contents toyota vehicle repair manual which used to be PDF links, it's now chm mode which is only webpages. I am trying to download the manual for my vehicle in two days and here is the fastest way I figured out.

Please share if you have better idea. I can't make those hyper-link work since they all became image in the pdf files.



Tools you will need


Firefox

PDFCreator

TIS login account ($15/2 days)


Install PDFCreator, create a new profile, change the Auto-save option; Change the filename to <Title>, update the directory for auto-save. You need create a new printer to use this new profile, which can auto save your pdf to particular folder.



Login TIS and open the repair manual, for the first page, make sure you selected the new PDFCreator printer as your current printer and print your first page, double check the pdf file at the auto-save folder and make sure that fits you want. I took the footer and header off so it looks much nicer.


For firefox, type “about:config” in the address bar and add print.always_print_silent as Boolean and set it to true.


Now, for each page you click on the left, there is a print icon on the top right corner, click that will print a new pdf file to the auto-save folder. For each page, you will need two clicks to save to pdf format.


Go through all your pages and hit the printer icon. You should be able to download the repair manual in couple hours. The PDF files will have the full text title in the pdf file name, which you can easily search.


I got my two vehicles' repair manual done in 7 hours.

 

What is the difference between AC60E and AC60F ?

 

2 wheel drive and 4x4 . The extension housing on the rear of the transmission and the output shaft are different

 

Here's a dumb question. Is there a transmission fluid dipstick on the 2016? I can't seem to find mine.

 

Its a sealed transmission meaning no filler tube . The transmission is filled from underneath the truck .
I am going to simply start a new thread ....wait here for the link .
You guys with the 2016 are not gonna like this link
https://www.tacomaworld.com/threads...ow-on-fluid-directly-from-the-factory.405642/

 

That's a negative ghost rider.

 

Thanks! Thought my eyes were deceiving me. Mine also has the issue when it's cold and I put it into drive it doesn't seem to engage.. then lurches.

 

Same checking procedure as the 2nd Gen except for one thing. Once you are in AT TEMP CHECK mode you remove the jumper from the OBD2 port. This allows the engine idle control to operate so you can get an accurate reading.